Proaim P-LLBT-150 Manual
Read below 📖 the manual in Italian for Proaim P-LLBT-150 (6 pages) in the Tripod category. This guide has been helpful for 8 people and has been rated 4.5 stars on average by 2 users
Page 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 150mm Bowl Baby Camera Tripod Stand w
Lever Fricon and Aluminum Spreader (P LLBT- - -150)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminium Spreader
A s s e m b ly Ma n u a l
2
Aluminum Spreader Setup
• Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
• Aer loosening the knobs, extend the
Spreader per your requirement.
• You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16 to 66cm/26” ”
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
• Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One stage telescopic design with fricon -
knob extends up to 6 inches to capture
low angle shots, and conversely, it can be easily -
extended up to 34 inches for greater elevaon.
• Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
• Unlock the red knob to adjust the Tripod s legs ’
according to your requirement.
• Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
• Mount the Tripod on the aluminum Spreader
by equally aligning them.
• Aer mounng the Tripod, properly secure it
using the rubber gripper.
150mm Bowl Baby Camera Tripod Stand Setup
Product Specifications
| Brand: | Proaim |
| Category: | Tripod |
| Model: | P-LLBT-150 |
Do you need help?
If you need help with Proaim P-LLBT-150, ask a question below and other users will answer you
Tripod Proaim User Manuals
17 October 2024
17 October 2024
15 October 2024
15 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Tripod User Manuals
- Tripod Neewer
- Tripod Kogan
- Tripod Vello
- Tripod Manfrotto
- Tripod Kodak
- Tripod E-Image
- Tripod Celly
- Tripod Revo
- Tripod Sachtler
- Tripod IOptron
- Tripod Tiltall
- Tripod Square Jellyfish
- Tripod Libec
- Tripod Gravity
- Tripod Celestron
- Tripod Glide Gear
- Tripod Vanguard
- Tripod Vinten
- Tripod Stalco
- Tripod SteadiCam
- Tripod ARRI
- Tripod Fidlock
- Tripod Vortex
- Tripod Robus
- Tripod Miller
- Tripod Studio Assets
- Tripod Easyrig
- Tripod Magnus
- Tripod Peak Design
- Tripod Hohem
- Tripod Flycam
- Tripod Velbon
- Tripod 3 Legged Thing
- Tripod FLM
- Tripod Fat Gecko
Latest Tripod User Manuals
27 October 2024
26 October 2024
25 October 2024
24 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024