PCE Instruments PCE-USM Manual
PCE Instruments
Measuring equipment
PCE-USM
Read below 📖 the manual in Italian for PCE Instruments PCE-USM (6 pages) in the Measuring equipment category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users
Page 1/6
PCE-USM RS-232 - USB Logger
The logger enables the user to save the transmission data of the RS-232 interface to one or more
folders in txt format, along with the me and date. The logger can receive and retrieve data. This
means that with the right conguraon (consider pin assignment of the RS-232), the PCE-USM
adaptor can be connected with any RS- 2 interface to record the data. 23
With the scales PCE-LSM / PCE-LS / PCE-AB / PCE-ABZ / PCE-PM / PCE-TP / PCE-BDM / PCE-BT / PCE-
TB and PCE-SD Series, the PCE-USM can be plugged directly onto the RS-232 interface.
In case it is not possible to plug the adaptor directly onto the RS-232 interface, you have the
possibility to use an extension cable The standard edion comes with an external power supply. .
(12V / 100 mA mains adaptor in + / out -)
1. Connect the PCE-USM adaptor with the RS-232 interface. Then provide power supply and watch
the diodes at the PCE-USM storage adaptor. Both diodes will light up briey and the diode at the side
of the RS-232 interface should be lit now. If it does not, this normally means that the PCE-USM is not
connected to the power supply. Check the power supply If the diode at the side of the RS-232 .
interface ashes, a data transfer to the PCE-USM storage adaptor takes place.
2. Now insert the USB pen drive into the PCE-USM USB storage adaptor and watch the diodes. The
diode at the side of the RS-232 interface will ash briey and then light up permanently. During the
me the diode was ashing, a conguraon le was saved to the pen drive (see below).If the diode
at the side of the USB interface did not light up, this can mean that the USB pen drive was not
recognised or that it is full. Check the USB pen drive’s formang and, if necessary, try using another
pen drive. FAT12 / FAT16 and FAT32 formatng is possible Now try to transmit a few data to the .
PCE-USM adaptor via the RS-232 interface and watch the diodes of the PCE-USM adaptor. If the data
transmission was successful, the diode at the side of the RS-232 interface should ash rst, followed
by the diode at the side of the RS-232 interface. This ashing indicates: date received and transferred
to USB.
In case the data transmission was successfully completed, there will be two les on the USB pen
drive.
„CONFIG.TXT“ This is the conguraon le in which you can set individual parameters.
„LOG.TXT“ This is the le which contains your saved values.
The conguraon le “CONFIG.TXT“ looks as follows:
The values can easily be changed and thus adapted to your individual needs and dierent devices.
The values behind the can be changed On the right behind , you can see the possibilies of „=“ . „//“
what you can enter (allowed values).
Product Specifications
| Brand: | PCE Instruments |
| Category: | Measuring equipment |
| Model: | PCE-USM |
Do you need help?
If you need help with PCE Instruments PCE-USM, ask a question below and other users will answer you
Measuring equipment PCE Instruments User Manuals
24 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
Measuring equipment User Manuals
- Measuring equipment EBERLE
- Measuring equipment Hazet
- Measuring equipment Fluke
- Measuring equipment Megger
- Measuring equipment Kogan
- Measuring equipment AkYtec
- Measuring equipment Voltcraft
- Measuring equipment Klein Tools
- Measuring equipment PeakTech
- Measuring equipment Clean Air Optima
- Measuring equipment Flex
- Measuring equipment CSL
- Measuring equipment Elgato
- Measuring equipment Kern
- Measuring equipment Be Cool
- Measuring equipment ORNO
- Measuring equipment Einhell
- Measuring equipment Mitsubishi
- Measuring equipment Noyafa
- Measuring equipment Megasat
- Measuring equipment Reely
- Measuring equipment Joy-it
- Measuring equipment Logilink
- Measuring equipment Basetech
- Measuring equipment Gossen Metrawatt
- Measuring equipment TFA
- Measuring equipment Owon
- Measuring equipment Extech
- Measuring equipment Milesight
- Measuring equipment Sonel
- Measuring equipment Flir
- Measuring equipment Testo
- Measuring equipment MSW
- Measuring equipment Stamos
- Measuring equipment Ideal
- Measuring equipment Hikmicro
- Measuring equipment Siglent
- Measuring equipment Kopp
- Measuring equipment PICO
- Measuring equipment Enda
- Measuring equipment Wachendorff
- Measuring equipment Ermenrich
- Measuring equipment Beha-Amprobe
- Measuring equipment Adwa
- Measuring equipment Tempo
- Measuring equipment Vemer
- Measuring equipment Testboy
- Measuring equipment Duro Pro
- Measuring equipment Kyoritsu
- Measuring equipment Benning
- Measuring equipment MASIMO
- Measuring equipment Stahlwille
- Measuring equipment SHX
Latest Measuring equipment User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024