PCE Instruments PCE-TUM 50 Manual
PCE Instruments
Measuring equipment
PCE-TUM 50
Read below 📖 the manual in Italian for PCE Instruments PCE-TUM 50 (16 pages) in the Measuring equipment category. This guide has been helpful for 6 people and has been rated 4.5 stars on average by 2 users
Page 1/16
PCE-TUM 50 Turbidity Meter
Instruction Manual
1
Introduction
Thank you for selecting the -TUM 50 benchtop turbidity meter. This meter operates on the nephelometric principle of turbidity measurement and is PCE
designed to meet the criteria specified in ISO 7027. This manual provides a step- -step guide to help you operate the meter, please carefully read the by
following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meet following conditions.
• Relative humidity is less than 80 %.
• Ambient temperature is greater than 0 and less than 60 . °C °C
• No potential electromagnetic and ambient light interference.
The following list describes the standard components of the meter. After the unpacking, please check all components are complete. If any are damaged
or missing, please contact nearest distributor.
1 x Turbidity meter PCE-TUM 50
1 x Cuvette with lid
4 x Calibration cuvettes turbidity
1 x AC Power adapter
1 x Cleaning cloth
1 x User manual
2
Keypad
The PCE-TUM 50 turbidity meter is designed with a 6 key, names and symbols describe each function key controls.
KEY
FUNCTION
ESC
•Switches the meter ON/OFF.
•Exits the calibration or setting and returns to measurement.
CAL
•Starts calibration.
•Enters the setup menu (Press and hold the key for 3 seconds).
â—„ MI
•Stores current reading to memory.
•Increase value or scroll up through the menu item.
â–º MR
•Views the stored data.
•Decrease value or scroll down through the menu item.
ENTER
•Confirms the calibration, settings or displayed options.
MEAS
•Starts measurement.
•Locks the measured value.
Connecting the Power Adapter
• Before plugging in the power adapter, ensure that its voltage matches the local main voltage.
• Insert the connector of power adapter into the power socket on the rear panel of the meter. The meter is now ready for use.
Switching the Meter On and Off
• Press the key to switch on the meter, the display shows the measured value.
• Press and hold the key for 3 seconds, the meter will switch off.
Prior to Use
Switch on the meter and allow the meter to warm up for at least 15 minutes.
Product Specifications
| Brand: | PCE Instruments |
| Category: | Measuring equipment |
| Model: | PCE-TUM 50 |
Do you need help?
If you need help with PCE Instruments PCE-TUM 50, ask a question below and other users will answer you
Measuring equipment PCE Instruments User Manuals
24 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
Measuring equipment User Manuals
- Measuring equipment EBERLE
- Measuring equipment Hazet
- Measuring equipment Fluke
- Measuring equipment Megger
- Measuring equipment Kogan
- Measuring equipment AkYtec
- Measuring equipment Voltcraft
- Measuring equipment Klein Tools
- Measuring equipment PeakTech
- Measuring equipment Clean Air Optima
- Measuring equipment Flex
- Measuring equipment CSL
- Measuring equipment Elgato
- Measuring equipment Kern
- Measuring equipment Be Cool
- Measuring equipment ORNO
- Measuring equipment Einhell
- Measuring equipment Mitsubishi
- Measuring equipment Noyafa
- Measuring equipment Megasat
- Measuring equipment Reely
- Measuring equipment Joy-it
- Measuring equipment Logilink
- Measuring equipment Basetech
- Measuring equipment Gossen Metrawatt
- Measuring equipment TFA
- Measuring equipment Owon
- Measuring equipment Extech
- Measuring equipment Milesight
- Measuring equipment Sonel
- Measuring equipment Flir
- Measuring equipment Testo
- Measuring equipment MSW
- Measuring equipment Stamos
- Measuring equipment Ideal
- Measuring equipment Hikmicro
- Measuring equipment Siglent
- Measuring equipment Kopp
- Measuring equipment PICO
- Measuring equipment Enda
- Measuring equipment Wachendorff
- Measuring equipment Ermenrich
- Measuring equipment Beha-Amprobe
- Measuring equipment Adwa
- Measuring equipment Tempo
- Measuring equipment Vemer
- Measuring equipment Testboy
- Measuring equipment Duro Pro
- Measuring equipment Kyoritsu
- Measuring equipment Benning
- Measuring equipment MASIMO
- Measuring equipment Stahlwille
- Measuring equipment SHX
Latest Measuring equipment User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024