PCE Instruments PCE-PH 15 Manual
PCE Instruments
Measuring equipment
PCE-PH 15
Read below 📖 the manual in Italian for PCE Instruments PCE-PH 15 (1 pages) in the Measuring equipment category. This guide has been helpful for 5 people and has been rated 4.5 stars on average by 2 users
Page 1/1
PH METER
PCE-PH 15 / 16 / 17 / 18
Specifications
Measure Range: 0.00-14.00PH
Accuracy: 0.1PH(at 20 ), 0.2PH
Resolution:0.01PH Operating Temperature: 0 50
Calibration: Manual, at one point through trimmer
Power Supply: 3 1.5V(AG-13 battery)
Dimensions:175mm 51mm 25mm. Weight: 57g
Operation
1.Remove the protective cap.
2.First rinse the electrode with distilled water, and suck it with filter-paper.
3.Turn the meter on by pressing the ON key.
4.Immerse the ph meter electrode in the solution to be tested.
5.Stir gently and wait for the reading to stabilize.
6.Press the "HOLD" key, the reading is be kept. When repeat measuring, please
press the "HOLD" key again, it automatically relieves the hold condition.
7.After use, rinse the electrode with water to minimize contamination. Turn the meter
off by pressing the OFF key.
8.Always replace the protective cap after use.
PH Calibration
1.Immerse the electrode in pH 6.86(pH7.00) buffer solution of phosphate, and gently shake it.
2.Allow the reading to stabilize and with a small screwdriver turn the calibration trimmer
until the display shows "6.86"("7.00"). Rinse the electrode with distilled water, and suck it
with filter-paper.
3.Immerse the electrode in pH4.01 or pH9.18(pH10.0) the buffer solution of borax.
4.After about one minute, until the display shows "4.01"or "9.18"("10.0").
Important:
The instrument's pH range must be re-calibrated whenever:
The electrode has been used(laid) for long time from the last calibration.
The electrode has been used in particularly taxing conditions.
The utmost accuracy is required.
Battery Install
If the meter can not be switched on or the display fades, To change batteries, takes down
the meter back battery case and replaces batteries. Pay attention to the polarity of battery.
Warranty
These instruments are warranted from all defects in material and manufacturing for
a period of one year from the date of purchase.
If during this period, the repair or the replacement of parts is required where the
damage is not due to negligence or erroneous operation by user, please return the
parts to either dealer or our offices, and the repair will be effected free of charge.
Product Specifications
| Brand: | PCE Instruments |
| Category: | Measuring equipment |
| Model: | PCE-PH 15 |
Do you need help?
If you need help with PCE Instruments PCE-PH 15, ask a question below and other users will answer you
Measuring equipment PCE Instruments User Manuals
24 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
Measuring equipment User Manuals
- Measuring equipment EBERLE
- Measuring equipment Hazet
- Measuring equipment Fluke
- Measuring equipment Megger
- Measuring equipment Kogan
- Measuring equipment AkYtec
- Measuring equipment Voltcraft
- Measuring equipment Klein Tools
- Measuring equipment PeakTech
- Measuring equipment Clean Air Optima
- Measuring equipment Flex
- Measuring equipment CSL
- Measuring equipment Elgato
- Measuring equipment Kern
- Measuring equipment Be Cool
- Measuring equipment ORNO
- Measuring equipment Einhell
- Measuring equipment Mitsubishi
- Measuring equipment Noyafa
- Measuring equipment Megasat
- Measuring equipment Reely
- Measuring equipment Joy-it
- Measuring equipment Logilink
- Measuring equipment Basetech
- Measuring equipment Gossen Metrawatt
- Measuring equipment TFA
- Measuring equipment Owon
- Measuring equipment Extech
- Measuring equipment Milesight
- Measuring equipment Sonel
- Measuring equipment Flir
- Measuring equipment Testo
- Measuring equipment MSW
- Measuring equipment Stamos
- Measuring equipment Ideal
- Measuring equipment Hikmicro
- Measuring equipment Siglent
- Measuring equipment Kopp
- Measuring equipment PICO
- Measuring equipment Enda
- Measuring equipment Wachendorff
- Measuring equipment Ermenrich
- Measuring equipment Beha-Amprobe
- Measuring equipment Adwa
- Measuring equipment Tempo
- Measuring equipment Vemer
- Measuring equipment Testboy
- Measuring equipment Duro Pro
- Measuring equipment Kyoritsu
- Measuring equipment Benning
- Measuring equipment MASIMO
- Measuring equipment Stahlwille
- Measuring equipment SHX
Latest Measuring equipment User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024