PCE Instruments PCE-444 Manual
PCE Instruments
Measuring equipment
PCE-444
Read below 📖 the manual in Italian for PCE Instruments PCE-444 (2 pages) in the Measuring equipment category. This guide has been helpful for 10 people and has been rated 4.5 stars on average by 2 users
Page 1/2
Manual
Environmental Tester
PCE-444
1 Safety .
Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specied in this manual; otherwise, the protection provided by the meter
may be impaired.
▲ ： Environment conditions
1 90RH Non-condensation ． RH ≤ ％（ ）
2 Operating temperature:- /-4 ． 20℃～60℃ ℉～140℉
▲ Maintenance
1 Repairs or servicing not covered in this manual should only be performed by ．
qualied personnel.
2 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvents ．
on this instrument.
▲ ： Safety symbol
Comply with EMC
2 Introduction .
The Humidity & Temperature Meter is designed with a high accuracy humidity &
temperature sensor, providing high accuracy, fast response and stable readings. It is widely used
for monitoring and collecting data of environment temperature and humidity. This meter is widely
used for measurement of temperature and humidity of room, metro, library, commercial center,
communication center room, etc.
3 Features.
➢ Imported high accuracy humidity &temperature sensor ,high accuracy, fast response
➢ Color LCD display with backlight
➢ Temperature unit selection / ：℃ ℉
➢ MAX/MIN
➢ HOLD
➢ Dew point temperature
➢ Wet bulb temperature
➢ Enable/Disable auto power o
➢ Over range indication
➢ Low battery indication
4. Basic Operation
1. Open battery cover and install 3*1.5V AAA batteries in the battery compartment.
2.Power on: press“ ”to power on，the meter conducts self-inspection, after LCD displays, it
measures temperature and humidity automatically.
3.After testing ，press“ ”to turn off the meter.
Note: Remove the battery when the meter is to be stored for long periods of time to avoid battery
leakage.
5 Specication .
Humidity
Range 0 100%RH ： ～
Range
Accuracy
Resolution
45～75RH%
±3.0 RH%
0.1
Others
±4.5 RH%
Temperature
Range
Accuracy
Resolution
- /-4 20℃～70℃ ℉～158℉
±1.0 /±1.8 ℃ ℉
0.1
Dew point temp.
20 70℃～℃ ℉ ℉ /-4 ～158
±1.5 /±2.7 ℃ ℉
0.1
Remark: Accuracy is based on environment condition of ; 25℃
40 RH% 100 RH% ～
Wet bulb temp.
20 70℃～℃/ -4 158 ℉～℉
±1.5 /±2.7 ℃ ℉
0.1
Data update
0.5S
Enable/disable
auto power o
The meter shuts o automatically after 15 minutes inactivity under auto
power o mode, disable auto power o is available
Operating conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～90
Storage conditions
- /-4 ,10 RH% RH% 20℃～60℃ ℉～140℉ ～75
Power supply
3*1.5V “AAA” batteries
Battery life
at least 50 hours
Dimensions
168*56*30.5 mm
Weight
75g
6 Meter description .
①. Temperature and humidity sensor
②. Color LCD display
③. Hold button
④. Power on/o button
⑤. MAX/MIN button
⑥. Mode selection button
⑦. Battery cover
⑧. Nameplate
7 LCD display description .
①. Data hold Icon
②. Auto power o Icon
③. Temperature reading
④. Dew point temperature units icon
⑤. Wet bulb temperature units icon
⑥. Humidity reading
⑦. Humidity unit icon
⑧. Temperature unit icon
⑨. low battery Icon
⑩. MAX/MIN
8 Operation instruction .
8.1 power on/o；
；
；
；；press“ ”to turn on/off the meter.
8.2 In the measuring mode Data hold; ， ，press“ ” “HOLD”Icon will appear on the
LCD which indicates the data is freezed. To release the held reading， ，press“ ”again.
8.3 ; In the measuring mode MAX/MIN ，press“ ”， “MAX”will appear on the LCD，
the captured maximum readings will be displayed on the LCD, press“ ”again “MIN”will ，
appear on the LCD and the captured minimum readings will be displayed on the LCD. Long
press“ ”，the meter exit MAX/MIN measurement mode and back to normal measuring mode.
8.4 with the meter on it can select temperature, dew point key；
；
；
；； ， ，press“ ”
temperature and wet bulb temperature in turn.
8.5 Use of compound key
；
；
；
；；
8.5.1 With the meter o ter， ，press“ ”first and hold then press“ ”to power on the me ，
it can change temperature unit(°C/°F) is preset. ，℃
8.5.2 With the meter o，press “ ”first and hold，then press“ ”to power on the meter，
“ ”icon on the LCD display disappear, which indicates the power off functions is disabled. You
need to turn off the meter through pressing “ ”by manual.
Note: icon displayed on the screen, it indicates that the meter will automatically turn When“ ”
o after approx. 15 minutes of inactivity.
9 Notes .
1． This meter has already been calibrated before delivery. Do not revise the calibration parameters
without professional personnel and device.
【 】Note The unit has been calibrated before delivery. The recommended calibration period is
one year.
2 Repairs or servicing not covered in this manual should only be performed by qualied ．
personnel.
3 Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvent on this ．
instrument.
4 Remove the battery when the meter is to be stored for long periods of time to avoid battery ．
leakage.
5 ．When the battery is low.LCD display “ ”, a new battery is needed.
10. Accessories
1．User’s manual
2 1.5V AAA Battery．
Product Specifications
| Brand: | PCE Instruments |
| Category: | Measuring equipment |
| Model: | PCE-444 |
Do you need help?
If you need help with PCE Instruments PCE-444, ask a question below and other users will answer you
Measuring equipment PCE Instruments User Manuals
24 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
22 October 2024
Measuring equipment User Manuals
- Measuring equipment EBERLE
- Measuring equipment Hazet
- Measuring equipment Fluke
- Measuring equipment Megger
- Measuring equipment Kogan
- Measuring equipment AkYtec
- Measuring equipment Voltcraft
- Measuring equipment Klein Tools
- Measuring equipment PeakTech
- Measuring equipment Clean Air Optima
- Measuring equipment Flex
- Measuring equipment CSL
- Measuring equipment Elgato
- Measuring equipment Kern
- Measuring equipment Be Cool
- Measuring equipment ORNO
- Measuring equipment Einhell
- Measuring equipment Mitsubishi
- Measuring equipment Noyafa
- Measuring equipment Megasat
- Measuring equipment Reely
- Measuring equipment Joy-it
- Measuring equipment Logilink
- Measuring equipment Basetech
- Measuring equipment Gossen Metrawatt
- Measuring equipment TFA
- Measuring equipment Owon
- Measuring equipment Extech
- Measuring equipment Milesight
- Measuring equipment Sonel
- Measuring equipment Flir
- Measuring equipment Testo
- Measuring equipment MSW
- Measuring equipment Stamos
- Measuring equipment Ideal
- Measuring equipment Hikmicro
- Measuring equipment Siglent
- Measuring equipment Kopp
- Measuring equipment PICO
- Measuring equipment Enda
- Measuring equipment Wachendorff
- Measuring equipment Ermenrich
- Measuring equipment Beha-Amprobe
- Measuring equipment Adwa
- Measuring equipment Tempo
- Measuring equipment Vemer
- Measuring equipment Testboy
- Measuring equipment Duro Pro
- Measuring equipment Kyoritsu
- Measuring equipment Benning
- Measuring equipment MASIMO
- Measuring equipment Stahlwille
- Measuring equipment SHX
Latest Measuring equipment User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024