Genexis Hybrid Element NT Manual

Genexis AV extender Hybrid Element NT

Read below 📖 the manual in Italian for Genexis Hybrid Element NT (1 pages) in the AV extender category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users

Page 1/1
Hybrid Element installation manual
1. Removing dummy cover
• Pushandholdtheunlocking
button.








• Movethedummycoververtically
untilitisevenwiththemarked
lineandtakeitoff.
2. Preparation and
installation of the CATV
receiver (optional)
• RemovetheCATVdrawerfromthe
baseplate.







• Removethedustcapfromthe
CATVdrawer.











• PlacetheCATVreceiverinsidethe
CATVdrawer.Pushgentlyuntil
youhearanaudible‘click’.









• Removethedustcapfromthe
CATVreceiver.(a)

• SlidetheCATVdrawerbackinthe
FTUandpushdownwardsuntil
youhearanaudible‘click’.(b)
3. Installation of the Hybrid
Element
• Removetheprotectioncapfrom
theElementfiberconnector.

• CarefullypositiontheHybrid
ElementontopoftheFiber
TerminationUnit.Thebottomof
theElementshouldmatchthe
markedlineontheFTU.







• InstalltheHybridElementby
gentlypushingthefrontpart,
whileslidingitdownuntilthe
FTUiscoveredandyouhearan
audible‘click’.

• TheHybridElementisnow
correctlyinstalled.
Hybrid Element connector
numbering
The number of Ethernet ports
available is dependent upon the
specific Hybrid Element model. What
your Hybrid Element looks like may
differ slightly from the image.
4. Powering of the Hybrid
Element
• Connectthe12Vplugofthe
suppliedadaptertotheHybrid
Elementandconnecttheadapter
toapowersocket.

www.genexis.eu Rev.2
Click!
Click!
Hybrid Live! slot
(LAN3)
Ethernet port 1
(LAN1)
Ethernet port 2
(LAN2)
a. b.

Product Specifications

Brand: Genexis
Category: AV extender
Model: Hybrid Element NT

Do you need help?

If you need help with Genexis Hybrid Element NT, ask a question below and other users will answer you