Atlona AT-AVA-EX70-2PS-KIT Manual
Atlona
AV extender
AT-AVA-EX70-2PS-KIT
Read below 📖 the manual in Italian for Atlona AT-AVA-EX70-2PS-KIT (8 pages) in the AV extender category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users
Page 1/8
1
Installation Guide
AT-AVA-EX70-2PS-KIT
4K/UHD HDMI Over HDBaseT TX/RX Kit
AT-AVA-EX70-2PS-KIT
The Atlona AT-AVA-EX70-2PS-KIT is an HDBaseT transmitter/receiver kit in the Avanceâ„¢ Series,
for video up to 4K/UHD 60Hz 4:2:0 and HDMI data rates up to 10 Gbps. The AVA-EX70-2PS-KIT
is HDCP 2.2 compliant and provides HDMI transmission up to 230 feet (70 meters) for 1080p
video, and up to 130 feet (40 meters) for 4K/UHD over CAT6a/7 cable. This extender kit features
integrated HDBaseT link status testing for quick verication of twisted pair cabling integrity, as
well as HDMI clock stretching, EDID ltering, and HDMI signal regeneration for legacy HDMI
source devices. The AVA-EX70-2PS-KIT delivers a cost-eective solution for HDMI extension,
with locally powered transmitter and receiver endpoints as well as surface mounting hardware for
discreet installation.
IMPORTANT: Visit https://atlona.com/product/AT-AVA-EX70-2PS-KIT for the latest
rmware updates and Installation Guide.
1 x AT-AVA-EX70-2PS-TX
1 x AT-AVA-EX70-2PS-RX
4 x Mounting brackets
8 x Mounting screws
2 x 5V DC power supply
2 x IEC cable
1 x Installation Guide
Package Contents
2
Installation Guide
AT-AVA-EX70-2PS-KIT
DC 5V HDBaseT IN HDMI OUT
AT-AVA-EX70-2PS-RX
PWR
LINKFW
HDBaseT IN
DC 5V HDBaseT OUT HDMI IN
AT-AVA-EX70-2PS-TX
PWR
LINKFWTEST
HDBaseT OUT
Panel Descriptions
HDBaseT LED Descriptions
1 TEST
Quick and easy test for category cables.
Use the button to start the test and the
LED to determine pass or fail.
2 FW
Connect a micro-USB to USB-A type
cable from this port to a computer, to
update the rmware.
3 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4 DC 5V
Connect the included power supply to this
port.
5 HDBaseT OUT
Connect an HDBaseT cable from this port
to the port on the receiver.HDBaseT IN
6 HDMI IN
Connect an HDMI cable from a source to
this port. e.g. HDR BluRay Player
7 FW
Not used at this time.
8 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
9 DC 5V
Connect the included power supply to this
port.
10 HDBaseT IN
Connect an HDBaseT cable from this
port to the port on the HDBaseT OUT
transmitter.
11 HDMI OUT
Connect an HDMI cable from this port to
an HDMI display.
a Green LED
When a category cable is connected
and receiving signal this LED will be
illuminated. If no cable or signal is being
received, the LED will be o.
b Yellow LED
This LED displays the status of the
HDBaseT rmware. When the LED is
blinking slowly, the rmware is good. If
the LED is blinking rapidly or o, there
is no rmware or the rmware has been
corrupted.
9
5
b b
610 11
4
a a
83 721
3
Installation Guide
AT-AVA-EX70-2PS-KIT
The AT-AVA-EX70-2PS-KIT includes two mounting brackets and four mounting screws each,
which can be used to attach the units to any at surface.
1. Position one of the mounting brackets,
as shown below, aligning the holes on
the side of the enclosure with one set of
holes on the mounting bracket.
2. Use the enclosure screws to secure the
mounting bracket to the enclosure.
3. Repeat the above steps to attach
the second mounting bracket to the
opposite side of the unit.
Mounting Instructions
FW
AT -AVA- EX70-2PS -RX
POWER
LINK
Included screws
4. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall
surface, a #6 drywall screw is recommended.
NOTE: Mounting brackets can also be inverted
to mount the unit under a table or other at
surface.
FW
AT -AVA- EX70 -2P S-RX
POW ER
LINK
1. Connect a source to the port on the transmitter.HDMI IN
2. port on the receiver.Connect a display to the HDMI OUT
3. port on the transmitter, to the Connect an category cable, from the HDBaseT OUT
HDBaseT IN port on the receiver.
4. Connect the included 5V power supplies into the transmitter and receiver.
5. Connect power supply to an AC outlet.
Installation
Product Specifications
| Brand: | Atlona |
| Category: | AV extender |
| Model: | AT-AVA-EX70-2PS-KIT |
Do you need help?
If you need help with Atlona AT-AVA-EX70-2PS-KIT, ask a question below and other users will answer you
AV extender Atlona User Manuals
19 October 2024
19 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
AV extender User Manuals
- AV extender StarTech.com
- AV extender Extron
- AV extender Lindy
- AV extender Smart-AVI
- AV extender Rocstor
- AV extender Genexis
- AV extender PureLink
- AV extender Kramer
- AV extender ATen
- AV extender Blustream
- AV extender WyreStorm
- AV extender C2G
- AV extender Intelix
- AV extender Comprehensive
Latest AV extender User Manuals
22 October 2024
22 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
14 October 2024
14 October 2024
14 October 2024
14 October 2024