Atlona AT-OME-TX11-WP Manual
Atlona
AV extender
AT-OME-TX11-WP
Read below 📖 the manual in Italian for Atlona AT-OME-TX11-WP (8 pages) in the AV extender category. This guide has been helpful for 7 people and has been rated 4.5 stars on average by 2 users
Page 1/8
1
Installation Guide
AT-OME-TX11-WP
Omegaâ„¢ 4K/UHD
Wallplate Transmitter for HDMI with USB
AT-OME-TX11-WP
The Atlona AT-OME-TX11-WP is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus
embedded audio over distances up to 330 feet (100 meters). It features a US one-gang, wallplate
form factor, and includes interchangeable black and white wallplates and faceplates. Part of the
Omegaâ„¢ Series of integration products for modern AV communications and collaboration, the
OME-TX11-WP is HDCP 2.2 compliant and is remotely powered over HDBaseT. This transmitter
is ideal for use with Omega Series receivers as well as switchers with HDBaseT inputs.
1 x AT-OME-TX11-WP
1 x White faceplate
1 x White Decora® wallplate (US 1-gang)
1 x Black faceplate
1 x Black Decora®
wallplate (US 1-gang)
2 x Mounting screws (course thread)
2 x Mounting screws (ne thread)
Package Contents
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-TX11-WP
for the latest rmware updates and User Manual.
2
Installation Guide
AT-OME-TX11-WP
LINK
PWR
HDMI
AT-OME-TX11-WP
HDBaseT
OUT
CAN ICES-003(A)
/NMB-00(A)
05
4
1
23
1 PWR
This LED indicator glows solid green
when the unit is powered. Refer to
LED Indicators (page 5) for more
information.
2 LINK
This LED indicator glows solid amber to
indicate that the HDBaseT signal integrity
is good. Refer to LED Indicators (page
5) for more information.
3 HDMI
Connect an HDMI cable from this port to a
UHD/HD source.
4 HDBaseT OUT
Connect a category cable from this port
to the port of the AT-OME-HDBaseT IN
RX11 or other PoE-compatible receiver.
3
Installation Guide
AT-OME-TX11-WP
Faceplate Removal and Assembly
1. Unscrew the four Phillips-head screws from the sides of the faceplate, as shown:
2. Gently remove the faceplate by pulling it toward you.
3. Attach the new faceplate, then secure it using the four Phillips-head screws. Do not over-
tighten or apply high-torque devices to the screws. Doing so may damage the faceplate
and/or the screws.
4. Install the AT-OME-TX11-WP into the electrical box or mud ring.
5. Reattach the wallplate.
Removal of the faceplate requires that the AT-OME-TX11-WP be disassembled from the electrical
box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate.
LINK
PWR
HDMI
AT-OME-TX11-WP
Product Specifications
Brand: | Atlona |
Category: | AV extender |
Model: | AT-OME-TX11-WP |
Do you need help?
If you need help with Atlona AT-OME-TX11-WP, ask a question below and other users will answer you
AV extender Atlona User Manuals
19 October 2024
19 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
AV extender User Manuals
- AV extender StarTech.com
- AV extender Extron
- AV extender Lindy
- AV extender Smart-AVI
- AV extender Rocstor
- AV extender Genexis
- AV extender PureLink
- AV extender Kramer
- AV extender ATen
- AV extender Blustream
- AV extender WyreStorm
- AV extender C2G
- AV extender Intelix
- AV extender Comprehensive
Latest AV extender User Manuals
22 October 2024
22 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
14 October 2024
14 October 2024
14 October 2024
14 October 2024