Speco Technologies O8P32X Manual

Read below 📖 the manual in Italian for Speco Technologies O8P32X (9 pages) in the Not categorized category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users

Page 1/9
Quick Start Guide
O8P32X
Welcome
Thank you for purchasing this PTZ camera!
This owner's manual is designed to be a ref erence tool for your system.
Please read this manual carefully before operating the unit and retain it for future refer ence.
Should you require any technical assistance, contact Speco Technologies Tech Support at
1-800-645-5516
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use the included PoE++ injector or a certified/listed 24VDC 2. 5A Class 2 power supply
(not included) or adequate PoE++ (802.3bt) switch.
Please note: The product m ust be grounded to reduce the risk of electr ic shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
Do not expose the unit to heavy stress, violent vibration or long-term exposure to water
and humidity during transportation, storage, and/or installation.
Do not install near sources of heat.
Only install the product in environments inside the specification operating temperature
and humidity range.
Do not install the camera near power lines, radar equipment or other electrom agnetic
radiation.
Do not block any ventilation openings if any.
Use all the weatherpr oofing hardware requirement to minimize weather intrusion.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any
maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on
the lens surface.
Always use the dry soft cloth to clean the device. If ther e is too much dust, use a cloth
Important Safeguards and Warning
Warning
Statement
This camera should be installed by qualified personnel only.
All the examination and repair work should be done by qualified personnel.
Any unauthorized changes or modifications could void the warranty.
.
This guide is for reference only.
Product, manuals and specifications may be modified without prior notice. Speco
Technologies reserves the right to modify these without notice and without incurring
any obligation.
Speco Technologies is not liable for any loss caused by improper operation.
Note:
Before installation, check the package and make sure that all components are included.
Contact your rep or Speco customer service department immediately if something is
broken or missing in the package.
dampened with a small quantity of neutral detergent. Finally use the dry cloth to clean
the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure
cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.
The grounding holes of the product are recommended to be grounded to further enhance
the reliability of the camera.

Product Specifications

Brand: Speco Technologies
Category: Not categorized
Model: O8P32X

Do you need help?

If you need help with Speco Technologies O8P32X, ask a question below and other users will answer you




Not categorized Speco Technologies User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals