Metra 95-8272B Manual

Read below đź“– the manual in Italian for Metra 95-8272B (13 pages) in the Not categorized category. This guide has been helpful for 2 people and has been rated 4.5 stars on average by 2 users

Page 1/13
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/28/24 INST95-8272B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-8272B
KIT FEATURES
• ISO DDIN radio provision
• Painted scratch resistant matte black
• Single ISO DIN radio provision with 88-00-9004 pocket
sold separately
KIT COMPONENTS
• A) Front housing • B) Rear housing • C) Radio brackets • D) #8 x 3/8” Phillips screws (4) • E) #4 x 3/8” Phillips screws (8)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly.............................................. 2-3
Kit Preparation 4 .......................................................
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1761
Antenna adapter: 40-NI12
A B C D E
Subaru /Toyota BRZ GR86 2022-2024
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
(Figure B) (Figure D)
(Figure A) (Figure C)
DASH DISASSEMBLY
1. Unclip and remove the panel from the
end of the passenger side of the dash
with the door open. (Figure A)
2. Unclip and remove the trim panel above
the glove box and below the right side
air vent. (Figure B)
3. Unclip and remove the trim panel
above the trim panel removed in step 2.
(Figure C)
4. Remove (1) Phillips screw from the right
side of the drivers knee bolster panel
the unclip panel and let hang. (Figure D)
REV. 3/28/2024 INST95-8272B 3
DASH DISASSEMBLY
(CONT.)
(Figure F)
(Figure E) (Figure G)
5. Unclip and remove the A/C vents.
(Figure E)
6. Remove (4) 10 MM bolts securing the
radio then unclip and remove the radio
from the dash. (Figure F)
7. Remove (4) Phillips screws securing the
back plate to the factory radio and keep
for kit assembly. (Figure G)
Continue to Kit Preparation

Product Specifications

Brand: Metra
Category: Not categorized
Model: 95-8272B

Do you need help?

If you need help with Metra 95-8272B, ask a question below and other users will answer you




Not categorized Metra User Manuals

Metra

Metra 99-8725B Manual

15 October 2024
Metra

Metra 99-7382HG Manual

15 October 2024
Metra

Metra 99-7397B Manual

15 October 2024
Metra

Metra 99-7421 Manual

15 October 2024
Metra

Metra 99-3410 Manual

15 October 2024
Metra

Metra 95-8272B Manual

13 October 2024
Metra

Metra 99-7332 Manual

13 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals