Metra 95-7822 Manual

Read below đź“– the manual in Italian for Metra 95-7822 (8 pages) in the Not categorized category. This guide has been helpful for 6 people and has been rated 4.5 stars on average by 2 users

Page 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-7822
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-7822
KIT FEATURES
• DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio bracket • C) #14 x 1/2” Phillips screw (1)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly 2 ..................................................
Kit Assembly .......................................................... 3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1729
Antenna adapter: 40HD-11
A B C
Honda CR-Z (with factory navigation) 2011-2016
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the lower dash panel
cover above the pocket and remove the
8mm/Phillips screw. (Figures A and B)
2. Unclip and remove the radio from the
dash. (Figure C)
Tip: Start at the top of the radio.
(Figure B) (Figure D)
(Figure C) (Figure A)
3. Unplug and remove the radio.
4. Disassemble the factory NAV unit by
removing the (4) Phillips screws holding
it to the factory dash panel. (Figure D)
Continue to Kit Assembly
REV. 4/10/2024 INST95-7822 3
KIT ASSEMBLY
(Figure B)
1. radio bracketSecure the to the factory
dash panel using the factory hardware.
(Figure A)
2. radio trim panelSnap the into the
factory dash panel. (Figure B)
3. Slide the DDIN radio into the radio
bracket assembly and secure using
hardware supplied with the radio.
(Figure C)
(Figure A) (Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order of
disassembly. A #14 x 1/2” screw has
been provided if the factory 8mm
mounting screw has been lost or
discarded.

Product Specifications

Brand: Metra
Category: Not categorized
Model: 95-7822

Do you need help?

If you need help with Metra 95-7822, ask a question below and other users will answer you




Not categorized Metra User Manuals

Metra

Metra 99-8725B Manual

15 October 2024
Metra

Metra 99-7382HG Manual

15 October 2024
Metra

Metra 99-7397B Manual

15 October 2024
Metra

Metra 99-7421 Manual

15 October 2024
Metra

Metra 99-3410 Manual

15 October 2024
Metra

Metra 95-8272B Manual

13 October 2024
Metra

Metra 99-7332 Manual

13 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals