Luxul Epic 4 XBR-4500 Manual
Read below đ the manual in Italian for Luxul Epic 4 XBR-4500 (8 pages) in the Router category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users
Page 1/8
READ ME FIRST
QUICK INSTALL GUIDE
Epic 4
Multi-WAN Gigabit Router
XBR-4500
Includes:
îĻMulti-WAN Gigabit Router
îĻRack Mounting Ears (2)
îĻRubber Feet (4)
îĻPower Cord
SETUP AND CONFIGURATION
1
Physical Installation
The Epic 4 can be rack-mounted or used as a desktop router. Install
it in a stable/safe place to avoid any possible damage. Make sure
there is adequate space around the router for ventilation and proper
heat dissipation. Avoid placement in direct sunlight. Do not place heavy
articles on the router and verify the ground connection of the outlet
is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner
indentations on the bottom of the router, then place it on
a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
AV rack. As shown below, use four screws to attach the L-shaped brackets on
either side of the router, and mount the switch horizontally in the rack. Use
your desired hardware to aîx the router supports to the rack.
Install Brackets for Rack-Mounting Attach Feet for Desktop Installation
2
2
Connecting Ethernet and Power
Before installing the router, test the Internet connection to verify that it
is functioning properly. Once Internet access is conīŦrmed to be working,
follow the steps below for installation and conīŦguration.
Connecting Ethernet
Luxul recommends Category-5, super Category-5 or Category-6 unshielded
twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and
stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.
1. Connect the WAN: Connect the Internet cable from a telco/ISP
modem/router to the dedicated WAN 1 port on the router.
2. Connect the LAN: Connect a cable from the dedicated LAN 1 port on
the router to a switch, access point, or computer.
For best performance, and to maximize available ports, Luxul recommends
connecting all LAN devices to a Luxul switch, then connecting that switch
to the Epic 4 LAN port via a single Ethernet cable.
nNOTE: WAN 1 and LAN 1-4 are conīŦgured by default. The router
must be conīŦgured to provide additional WAN ports.
nNOTE: Connect all LAN devices to a Luxul switch, then connect that
switch to the router for best results.
Connecting Power
Use the included power cable to connect the router to a surge-protected
outlet. The AC input socket and power switch are on the rear panel. The
built-in power supply supports 100~240VAC at 50/60Hz.
Product Specifications
| Brand: | Luxul |
| Category: | Router |
| Model: | Epic 4 XBR-4500 |
Do you need help?
If you need help with Luxul Epic 4 XBR-4500, ask a question below and other users will answer you
Router Luxul User Manuals
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Router User Manuals
- Router Xiaomi
- Router Bosch
- Router Huawei
- Router HP
- Router Lancom
- Router TP Link
- Router D-Link
- Router StarTech.com
- Router Kogan
- Router Asus
- Router Cudy
- Router Netgear
- Router Hikvision
- Router Mikrotik
- Router Keezel
- Router Silentwind
- Router Alcatel
- Router Ubiquiti Networks
- Router SPL
- Router A-NeuVideo
- Router Atlona
- Router Teltonika
- Router MuxLab
- Router Starlink
- Router Kramer
- Router ATen
- Router Blustream
- Router Milesight
- Router Arris
- Router Tenda
- Router Draytek
- Router WyreStorm
- Router KanexPro
- Router Alfatron
- Router Digitalinx
- Router Intelix
- Router Comprehensive
- Router Ocean Matrix
- Router Sabrent
- Router Predator
- Router FSR
- Router PulseAudio
- Router Alfa
- Router Amped Wireless
- Router Keewifi
- Router Keenetic
Latest Router User Manuals
27 October 2024
26 October 2024
24 October 2024
24 October 2024
20 October 2024
19 October 2024
19 October 2024
18 October 2024
18 October 2024
18 October 2024