Totolink SW24DM Manual

Totolink Switch SW24DM

Read below 📖 the manual in Italian for Totolink SW24DM (1 pages) in the Switch category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users

Page 1/1
Checking Package Contents
Before Installation
1* 16/24 ports Ethernet Switch
1* Power Cord
1* Quick Installation Guide
2* Mounting Brackets and the fittings
Quick Installation Guide
Ethernet Switch
Suitable for: SG16,SG16D,SG24,SG24D
SW16,SW16D,SW16DM,
SW24,SW24D,SW24DM
For more information, please go to www.totolink.net
Information in this document is subject to change without prior notice.
Copyright â“’
TOTOLINK., All rights reserved.
Appearance
(Take SW24 & SG24 for Example)
LED Indicators
Working Modes
(Only for SG24
&SG24D)
Link/Act
(1~16 or 1~24)
POWER
LED Indicator Description
The indicator lights green when powered on
The corresponding indicator lights green when connected
to other device, flashes green during data transfer
Flow Control ON
Flow Control OFFM1
M2
23/24 Ports Aggregation based on MAC sourcesM3
1-22 Port Isolation 23~24 Port Uplink, M4
Note: M3 mode must be used with TOTOLINK products
Hardware Installation Refer to the application scene graph below
Notice
1. The switch should be used indoor only.
2. Use the Power cord comes with the switch.
3. Set the device on a flat surface strong enough to support the entire weight
of the device with all fittings.
4. Don’t place heavy objects on the switch.
Use Ethernet cable to connect router to Switch (LAN port to LAN port)
Use Ethernet cable to connect PC or Laptop’s RJ45 port to Switch
Plug one end of the power cord into switch’s AC power jack and then
other end to wall socket.
Ethernet Switch Router

Product Specifications

Brand: Totolink
Category: Switch
Model: SW24DM

Do you need help?

If you need help with Totolink SW24DM, ask a question below and other users will answer you