Panduit NKHDMI Manual

Read below 📖 the manual in Italian for Panduit NKHDMI (5 pages) in the Not categorized category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users

Page 1/5
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN625
Page 1 of 5
Table Top Box, Cable Nook
Part Number(s): PND100
Parts Included:
(1) Table Top Box
(1) Plate
(4) Plate Mounting Screws
(2) Mini-Com Faceplate
(2) NetKey Faceplate
(4) Faceplate Mounting Brackets
(4) Faceplate Mounting Screws
(8) Bracket Screws
(4) Table Mounting Brackets w/
Screws
(2) Cable Clamps & Screws
(1) Fastener Tool
PRINT UNSCALED AT 100%
Installation precautions
• For best results, place the Table Top Box, Cable Nook
in a dry area away from dust and moisture.
• To prevent fire or shock, do not expose this unit to
water or moisture. Do not place the Table Top Box,
Cable Nook in direct sunlight, near heaters or heat-
radiating appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm internal
components.
• Handle carefully and never lay the Table Top Box on
the thin bezel. Dropping, jarring or striking may
damage the bezel.
• Never place fingers inside the openings in the sides of
the unit or along the bezel edges. The sharp edges
may cause serious injury.
Cleaning
• Surfaces should be cleaned with a dry cloth. Never use
strong detergents or solvents, like alcohol or thinner. Do
not use a wet cloth or water to clean the unit.
Operation
• The access door opens to a 90-degree angle and then
slides into the unit. The door remains open
until all the cables are connected. The access door should
be closed with the cables routed through the curved
opening to prevent damage to the unit and to prevent
liquids from entering the opening.
• • Additionally, the cover should be closed when
not in use to prevent liquids or other debris from
damaging the unit.
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN625
Page 2 of 5
Mounting
Brackets
w/ Screws
4x
Plate
Faceplate
(NetKey or
Mini-com)
6-32 Screw
Plate to Housing
4x per Plate
Housing
PRINT UNSCALED AT 100%
Brackets 2x per
Faceplate
6-32 screw
Bracket to Module
Faceplate 2x per
Faceplate
4-40 screw
Bracket to Plate
4x per Faceplate
NetKey or Mini-Com
Modules
(not included)
Bezel
Access
Door
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN625
Page 3 of 5
Housing
Tabletop
Min. thickness 0.5" [1.27cm]
Max. thickness 3.5" [8.89cm]
Mounting
Brackets and
screws (4)
PRINT UNSCALED AT 100%
Use cut-out
template on
(page 5)

Product Specifications

Brand: Panduit
Category: Not categorized
Model: NKHDMI

Do you need help?

If you need help with Panduit NKHDMI, ask a question below and other users will answer you




Not categorized Panduit User Manuals

Panduit

Panduit AFR4EC Manual

19 October 2024
Panduit

Panduit NKUSBAA Manual

18 October 2024
Panduit

Panduit NKHDMI Manual

18 October 2024
Panduit

Panduit AFR4BC Manual

18 October 2024
Panduit

Panduit AFR4JB2S Manual

18 October 2024
Panduit

Panduit AFR4CC Manual

18 October 2024
Panduit

Panduit AFR4WTR Manual

18 October 2024
Panduit

Panduit AFR4TRT70 Manual

18 October 2024
Panduit

Panduit AFR4TBLG Manual

18 October 2024
Panduit

Panduit AFR4RA Manual

18 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals