Midland MXTA48 Manual

Read below 📖 the manual in Italian for Midland MXTA48 (1 pages) in the Not categorized category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users

Page 1/1
5900 Parretta Drive KANSAS CITY, MO 64120 ● ●
PHONE: (816) 241-8500 FAX: (816) 241-5713
EMAIL: mail@midlandusa.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/8/2024
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounting brackets or surfaces up to 3/4" thick. substantial
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is optional for mounting brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
off the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounting hole in the bracket or surface, Part C .
6. he Slide t at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in position while tightening the hex nut, Part F. Maximum torque 35 - . lb ft
8. Finish routing the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.

Product Specifications

Brand: Midland
Category: Not categorized
Model: MXTA48

Do you need help?

If you need help with Midland MXTA48, ask a question below and other users will answer you




Not categorized Midland User Manuals

Midland

Midland MXTA48 Manual

15 October 2024
Midland

Midland R1 Mesh Manual

15 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals