Intellinet 561969 Manual
Intellinet
Switch
561969
Read below π the manual in Italian for Intellinet 561969 (16 pages) in the Switch category. This guide has been helpful for 5 people and has been rated 4.5 stars on average by 2 users
Page 1/16
Scan to
register your
product warranty
Important: Read before use. β’ Importante: Leer antes de usar.
For additional beneξts:
or go to: register.intellinet-network.com/r/561969
54-Port L2+ Fully Managed PoE+
Switch with 48 Gigabit Ports and 6
SFP+ Uplinks
Instructions
Model 561969 (IPS-54GM06-10G-450W)
2
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit intellinet-network.com.
Register your product at register.intellinet-network.com/r/561969
or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
β’ on a level surface that can support the
weight of the switch (and any other
items that need to be considered);
β’ with a minimum of 25 mm
(approx. 1β) of clearance
on the top and sides for adequate ventilation;
β’ away from sources of electrical noise: radios,
transmitters, broadband amplifiers, etc.;
β’ where it cannot be affected by excessive moisture;
β’ within 100 m (approx. 328β) of network devices itβs to be connected to.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting
holes on one side of the switch and
secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and
screw the brackets to the rack.
5 Reconnect any cables.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your Intellinet Network
Solutions switch. If you use the chassis grounding screw, it should be
wired to an object that provides earth ground. In rackmount installations,
grounding is typically provided by the metal frame of the mounting rack.
English
Instructions
3English
Connections
β’ All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
β’ Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesnβt indicate a link or activity, check the
corresponding device for proper setup and operation.
β’ Use the included power cable to connect the receptacle
on the back of the switch to a power outlet.
LED Color Status Operation
PWR Green Flashing The LEDs of ports 1 β 48 are showing PoE status.
Off The LEDs of ports 1 β 54 are showing Link status.
RUN Green Flashing System is booting.
On System has booted successfully.
1β48
Link/
PoE*
Green
On Valid port connection. / The connected
device (PD) is receiving power.
Flashing Data transmitted/received.
Off No link established. / No powered device
(PD) is connected to the port.
49Sβ54S
(SFP+) Green
On Valid port connection.
Flashing Data transmitted/received.
Off No link established.
* NOTE: Press the CTRL button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
1 Open your Web browser.
2 http://Enter and the IP address of the switch in the Address
field. The default management IP address is . 192.168.2.1
3 EnterPress to display the login screen. In the Username
field, enter ; in the Password field, enter the admin serial
number OK on the bottom of the switch. Click .
*
Instructions
Product Specifications
| Brand: | Intellinet |
| Category: | Switch |
| Model: | 561969 |
Do you need help?
If you need help with Intellinet 561969, ask a question below and other users will answer you
Switch Intellinet User Manuals
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
14 October 2024
Switch User Manuals
- Switch Bosch
- Switch IKEA
- Switch Huawei
- Switch HP
- Switch EBERLE
- Switch Lancom
- Switch TP Link
- Switch Totolink
- Switch D-Link
- Switch StarTech.com
- Switch Cudy
- Switch Extron
- Switch Lindy
- Switch Ecler
- Switch Digitus
- Switch LevelOne
- Switch Engenius
- Switch CyberPower
- Switch CSL
- Switch Smart-AVI
- Switch Generac
- Switch Dahua Technology
- Switch Cambium Networks
- Switch ORNO
- Switch Planet
- Switch PCE
- Switch Equip
- Switch Mikrotik
- Switch Speaka
- Switch Alcatel
- Switch Elation
- Switch Logilink
- Switch Advantech
- Switch Atlona
- Switch Robbe
- Switch Crestron
- Switch IPGARD
- Switch PureLink
- Switch Blustream
- Switch WHALE
- Switch Tenda
- Switch Suevia
- Switch ZyXEL
- Switch Homematic IP
- Switch Setti+
- Switch Trendnet
- Switch Kaiser
- Switch QNAP
- Switch Rex
- Switch Juniper
Latest Switch User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024