Intellinet 561815 Manual

Read below 📖 the manual in Italian for Intellinet 561815 (16 pages) in the Not categorized category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users

Page 1/16
Important: Read before use. • Importante: Leer antes de usar.
16-Port Gigabit Ethernet
Switch
Instructions
Model 561815 (IES-16GDB)
For additional benets:
or go to: register.intellinet-network.com/r/561815
Scan to
register your
product warranty
2English
Instructions
The Intellinet Network Solutions 16-Port Gigabit Ethernet Switch offers an array of time-saving,
cost-effective features while providing superior network throughput. No configuration is required
and installation is plug and play. Thanks to its optional desktop and 19” rackmount design, superior
performance and value, the switch is the perfect choice for your small office or home network. With
a backplane speed of 32 Gbps, plenty of performance is available for your computers, servers and
other networking devices. Each of the ports automatically senses the link speed of the connected
network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.
For specifications, visit . Register your product at intellinetnetwork.com
register.intellinet-network.com/r/561815 or scan the QR code on the cover.
Green Ethernet Technology
More often than not, a network switch does not utilize all its ports at all times. Normally, when a
computer, notebook, network printer or other network-connected device is powered down, the
switch continues to consume the same amount of power as if the port were still active. Now, thanks
to the new, energy efficient IEEE 802.3az technology, this Intellinet Network Solutions switch detects
link status to all connected devices and reduces the power usage of ports not in use. In addition, the
switch can adjust the level of power output based on the length of the network cable connected to a
particular port. This feature allows for the enjoyment of maximum network performance, and when
things slow down, it automatically scales back power usage to conserve energy and save money.
LED COLOR STATUS STATUS DESCRIPTION
Power Off Power Off.
Green On Power On.
Link/Act/
Speed
Off No device is connected to the port.
Orange On A device is connected to the port at 10/100 Mbps speeds.
Green On A device is connected to the port at 1000 Mbps speeds.
Flashing Sending or receiving data.
Slide Switch
: default mode; allows normal communication between ports 1 – 16.Normal
Flow Control: disables the switch’s flow-control function.
: isolates ports 1 – 14 from each other while allowing them to connect to VLAN
ports 15 and 16; increases the forwarding rate when broadcast storms occur.
: allows ports 1 – 8 to achieve transmission distances Extend
up to 250 m (820 ft.) at a reduced speed of 10 Mbps.
Front Panel
3
English
Rear Panel
Power
Use the included power cord to connect the device (on the rear panel) to
an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to
provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis
grounding screw, it should be wired to an object that provides earth ground. In rackmount
installations, grounding is typically provided by the metal frame of the mounting rack.
Placement
Desktop Installation
Prior to use, it is recommended that the switch be placed/positioned on a level surface that
can support the weight of the switch (and possibly other objects) with at least 25 mm (approx.
1”) of clearance for ventilation; away from sources of electrical noise: radios, transmitters,
broadband amplifiers within 100 m (approx. 328’) of network devices it’s to be connected to.
Attach the rubber feet to the bottom of each corner of the switch to increase stability.
Rackmount Installation
The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets
on the switchs side panels (one on each side) and secure them with the screws provided.
Use the screws provided with the equipment rack to mount the
Intellinet Network Solutions data switch on the rack.
Instructions

Product Specifications

Brand: Intellinet
Category: Not categorized
Model: 561815

Do you need help?

If you need help with Intellinet 561815, ask a question below and other users will answer you




Not categorized Intellinet User Manuals

Intellinet

Intellinet 525787 Manual

15 October 2024
Intellinet

Intellinet 780094 Manual

15 October 2024
Intellinet

Intellinet 780070 Manual

15 October 2024
Intellinet

Intellinet 561242 Manual

14 October 2024
Intellinet

Intellinet 561891 Manual

14 October 2024
Intellinet

Intellinet 561907 Manual

14 October 2024
Intellinet

Intellinet 561983 Manual

14 October 2024
Intellinet

Intellinet 560993 Manual

14 October 2024
Intellinet

Intellinet 562027 Manual

14 October 2024
Intellinet

Intellinet 562102 Manual

14 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals