Imarflex PR-2000D Manual

Read below 📖 the manual in Italian for Imarflex PR-2000D (7 pages) in the Not categorized category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users

Page 1/7
IMPORTANT SAFEGUARDS
This manual contains important safety instruction that should be followed during the
installation and maintenanc of the AVR. Please read this manual thoroughly before e
attempting to install or operate in this AVR .
1. Read all instructions carefully.
2. This equipment is available for 0Va.c. supply voltage and loads. 22
Please verify that this model matches your AC main /load voltage requirements.
3. This equipment is designed for normal use only. The manufacturer neither
recommends nor knowingly sells this product for use in critical life support application.
Connect if possible to main supply socket outlet with an earth connector. A means of
disconnection of the main supply should be within 2 meters of the AVR.
4. The AVR relies on your building wiring over-current protection, which must be rated
between 30 amperes.
5. This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliances by a person
responsible for their safety.
6. Children should be supervised to ensure that they do not play with the AVR.
7. Although your AVR has been designed and manufactured to assure personal safety,
improper use can result in electrical shock of re. To insure safety, please observe
the following rules:
Turn o and unplug your AVR before cleaning. Do not use liquid or aerosol
cleaners. A dry cloth is recommended to remove dust from the surface of your
AVR.
Do not install or operate your AVR near water.
Do not place the AVR on an unstable cart, stand or table.
Do not place the AVR under direct sunlight or close to heat emitting sources.
Do not place the AVR power cord in any area where it may get damaged by heavy
objects.
Do not overload or short circuit the AVR.
Follow all warnings and instructions marked on the AVR.
When connected to any appliance with the built-in motor compressor, the starting
power is generally several times of the appliances listed power rating. Make sure
that the total starting power capacity of all connected appliance does not exceed
the listed maximum output power capacity of the regulator. For color TV, calculate
it twice as its listed capacity.
Make sure that the regulator is of the same output voltage and frequency as the
appliance’s it connected.
Make sure that the voltage of electrical source is within the listed range of input
voltage of the regulator.
8. ATTENTION:
Turn o and unplug the your AVR from the convenience outlet and contact or bring
the AVR to Imarex Authorized Service Center if;
The power cord or plug damaged.
quid has been spilled on the AVR or it emits a strange smell from inside. Li
The fuse blows frequently or the circuit breaker trips frequently.
The AVR does not operate even when user follows the operating instruction.
9. Save this instruction manual for reference.

Product Specifications

Brand: Imarflex
Category: Not categorized
Model: PR-2000D

Do you need help?

If you need help with Imarflex PR-2000D, ask a question below and other users will answer you




Not categorized Imarflex User Manuals

Imarflex

Imarflex HDR-2000VA Manual

14 October 2024
Imarflex

Imarflex IMX-345S Manual

14 October 2024
Imarflex

Imarflex IDR-8000VA Manual

14 October 2024
Imarflex

Imarflex IDC-1810 Manual

14 October 2024
Imarflex

Imarflex MDR-3000VA Manual

14 October 2024
Imarflex

Imarflex PR-2000D Manual

14 October 2024
Imarflex

Imarflex UPS-850G Manual

14 October 2024
Imarflex

Imarflex IMX-270B Manual

14 October 2024
Imarflex

Imarflex IMX-250 Manual

14 October 2024
Imarflex

Imarflex PR-1000D Manual

14 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals