Festo SDBC-MSB-1L-NU-K-0.3-M8 Manual

Festo Not categorized SDBC-MSB-1L-NU-K-0.3-M8

Read below 📖 the manual in Italian for Festo SDBC-MSB-1L-NU-K-0.3-M8 (1 pages) in the Not categorized category. This guide has been helpful for 2 people and has been rated 4.5 stars on average by 2 users

Page 1/1
SDBC-MSB
Proximity sensor
Festo SE & Co.KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Operating instructions
8152136
2021-02
[8152138]
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product
è www.festo.com/sp.
2 Safety
2.1 Safety instructions
–Before working on the electrical system: switch off the power supply.
WARNING
Risk of injury due to electric shock.
• For the electric power supply, use only PELV circuits that ensure a reliable
electric disconnection from the mains network.
• Observe IEC 60204-1/EN 60204-1.
2.2 Intended use
The proximity sensor is intended for use in Festo products for sensing the position
of magnets, e.g. the position of the piston.
The product is intended for use in industrial environments.
3 Electrical connection
SDBC-MSB-1L-... Circuit diagram
NU-K-2-LE
PU-K-2-LE
NU-K-0.3-M8
PU-K-0.3-M8
ZU-K-2-LE
Tab. 1
4 Mechanical installation
Fig. 1: Mounting
5 Technical data
Operating conditions SDBC-MSB-1L-...
NU-K-2-LE
PU-K-2-LE
NU-K-0.3-M8
PU-K-0.3-M8
ZU-K-2-LE
Operating voltage range [V DC] 5 … 30 10 … 28
Max. output current [mA] 100 50
Max. switching capacity [W] 3 1.4
Ambient temperature [°C] –10 … +70
Degree of protection IP67
Tab. 2

Product Specifications

Brand: Festo
Category: Not categorized
Model: SDBC-MSB-1L-NU-K-0.3-M8

Do you need help?

If you need help with Festo SDBC-MSB-1L-NU-K-0.3-M8, ask a question below and other users will answer you




Not categorized Festo User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals