Digitus DN-80202-1 Manual

Digitus Switch DN-80202-1

Read below 📖 the manual in Italian for Digitus DN-80202-1 (6 pages) in the Switch category. This guide has been helpful for 11 people and has been rated 4.5 stars on average by 2 users

Page 1/6
5 Port Gigabit Switch,
Unmanaged
Quick Installation Guide
DN- -1 80202
2
1. About T G he uide
This guide provides instructions Ethernet to install the Switch.
Note: The model you have purchased may appear slightly different from the
illustrations shown in the document. Refer to the Product Instruction and
Technical Specification sections for detailed information about your switch, its
components, network connections, and technical specifications.
This guide mainly divides into 3 parts:
1. Product introduction: functional overview and introduction of panel definitions
2. Hardware installation: step by step hardware installation process
3. Technical specifications
2. Product Introduction
The 5-Port Gigabit Switch from DIGITUS® is perfectly suited for the easy expansion of
your network. Thanks to its fanless design, the switch operates completely noise-
free and does not require configuration. Each port can be used as a LAN or uplink
port, the cable and network speed are detected automatically. The switch also
supports the energy saving features IEEE802.3az & Full-Duplex Flow Control
IEE802.3x. Real Plug and Play – Just plug in the network cable and get started.
Product Features
• Automatic MDI/MDI- fX crossover or plug- - and play
• 5 port supports both 10/100/1 000 Mbps speed auto negotiation
• 5 DC 1 A external power adapter
• Supports operating temperatures from 0 °C ~ 40 °C
Front Panel
The front panel consists of LED indications.
3
LED Lamp
Power: The Power LED lights up when the switch is connected to a power source.
Link/Act LED: The Link/Act LED flashes which indicates a network link through the
corresponding port. Blinking indicates that the Switch is either sending or receiving
data to the port.
Rear Panel
The rear panel view consists of a DC power connector and network ports.
Connect the power adapter output terminal to this port. Supports input voltages 5V
1A.
3. Hardware installation
This chapter provides unpacking and installation information for the Ethernet switch.
Open the seal
Open the shipping carton and carefully unpack its contents. Please consult the
packing list located in the User Manual to make sure all items are present and
undamaged. If any item is missing or damaged, please contact the local reseller for
replacement.
• Switch 1 pcs
• Power adapter 1 pcs
• QIG 1 pcs
Connecting power supply
Using the AC power cord to connect to the power adapter, and then plug the output
terminal of the adapter into the DC IN socket on the back of the switch. (The AC
power outlet should be grounded)
Switch installation
For safe switch installation and operation, it is recommended that you:

Product Specifications

Brand: Digitus
Category: Switch
Model: DN-80202-1

Do you need help?

If you need help with Digitus DN-80202-1, ask a question below and other users will answer you




Switch Digitus User Manuals

Digitus

Digitus DS-12850 Manual

22 October 2024
Digitus

Digitus DN-651146 Manual

20 October 2024
Digitus

Digitus DN-80202-1 Manual

15 October 2024
Digitus

Digitus DN-95348-2 Manual

15 October 2024
Digitus

Digitus DS-72220-1GE Manual

13 October 2024
Digitus

Digitus DS-72220-1US Manual

13 October 2024
Digitus

Digitus DS-72220-1TR Manual

13 October 2024

Switch User Manuals

Latest Switch User Manuals

Tenda

Tenda TEM2010X Manual

27 October 2024
Crestron

Crestron GLXP-SW10 Manual

27 October 2024
Crestron

Crestron GLXP-SW16 Manual

27 October 2024
IPGARD

IPGARD SDVN-42-X Manual

26 October 2024
IPGARD

IPGARD SUHN-4S Manual

26 October 2024
IPGARD

IPGARD SDMN-4S-P Manual

26 October 2024
IPGARD

IPGARD SUHN-2S-P Manual

26 October 2024
IPGARD

IPGARD SUHN-4D Manual

26 October 2024
IPGARD

IPGARD SDVN-82-X Manual

26 October 2024