Vonyx VX820 Manual

Vonyx Speaker VX820

Read below 📖 the manual in Italian for Vonyx VX820 (24 pages) in the Speaker category. This guide has been helpful for 7 people and has been rated 4.5 stars on average by 2 users

Download PDF

Page 1/24

VX820 Column Speaker Set

Ref. nr.: 170.200

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

NÁVOD K POUŽITÍ

V1.0

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere to.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shi ing or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be pp

returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to

drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might

damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

The label on the back/ der side the product indicates the mains voltage to which it must be connected. Check that the mains un of

voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must

also be connected directly to the m ns voltage and no dimmer or adjustable power supply may be used. ai

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

OPENING THE LID

Slide the locking handle to the inside, unlocking the lid. Turn over the lid to expose the control panel and column storage.

OVERVIEW

1. BT PAIR

Press to make BT streaming connection possible. When pressed, the VX820 is

ndable on the streaming device.

2. LINK (TWS/STEREO PAIRING)

When having two VX820 column speaker systems, it’s possible to initiate a link

(pairing) between the two by pressing this button on both systems. Both portable

systems will be emitting the same signal from the streaming audio function.

3. DSP PRESETS

Press to switch between presets (main, hi, monitor, dj and speech).

4. MASTER LEVEL

Rotate to adjust the master output level.

5. TREBLE

Rotate to adjust the treble (high tones) level of the corresponding channel.

6. BASS

Rotate to adjust the bass ( tones) level of the corresponding channel.low

7. CHANNEL VOLUME

Rotate to adjust the annel output volume level. ch

8. INPUT SWITCH

Toggle switch to change between dierent inputs for channel 1 and 2 (mic, guitar

and line).

9. NNEL 1 2 INPUT CHA AND

XLR and 6.3mm combo jack input connectors for connecting microphones,

guitars or to use as line input.

10. LINE/BT SWITCH

Press to toggle between line- and BT input modes.

11. CHANNEL 3/4 INPUT

RCA line input sockets for channel 3 and 4.

12. AUX INPUT

3.5mm auxiliary input jack to connect an external audio device ( - or MP3 players, etc. CD ).

13. MIX OUTPUT

XLR mix ouput socke t.

14. POWER INPUT

Socket for plugging in the supplied power cord.

15. POWER SWITCH

Press to turn the device on/o.

Product Specifications

Brand:	Vonyx
Category:	Speaker
Model:	VX820

Do you need help?

If you need help with Vonyx VX820, ask a question below and other users will answer you

Your Name*

Your Email*

Write your question here

Speaker Vonyx User Manuals

Vonyx VX820 Manual

21 October 2024

Vonyx SPJ-1200ABT Manual

14 October 2024

Speaker User Manuals

Latest Speaker User Manuals

DAP Audio NRG-15SA Manual

27 October 2024

DAP Audio NRG-8A Manual

27 October 2024

DAP Audio Odin PM-01 Manual

27 October 2024

August WS150 Manual

27 October 2024

DAP Audio NRG-15S Manual

27 October 2024

DAP Audio PSS-106 Manual

27 October 2024

DAP Audio Pure-12 Manual

27 October 2024

DAP Audio NRG-10 Manual

27 October 2024

DAP Audio Odin T-8A Manual

27 October 2024

DAP Audio Pure-15AS Manual

27 October 2024