Rigol DG5251 Manual
Rigol
SLR camera
DG5251
Read below 📖 the manual in Italian for Rigol DG5251 (4 pages) in the SLR camera category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users
Page 1/4
Installation Guide RIGOL
1
DG5000 Rack Mount Kit
This rack mount kit is designed to mount RIGOL DG5000 series function/arbitrary
waveform generator into a 19-inch cabinet that conforms to the Electronic Industries
Association (EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Front Plate 1 --
2 Bottom Plate 1 --
3 Left Plate 1 --
4 Right Plate 1 --
5 Retaining Bracket 2 --
6 M4 Screw 16 M4x8 Phillips Pan Head Screw
7 M6 Screw 4 M6x16 Phillips Pan Head Screw
8 M6 Nut 4 M6 Square Lock Cage Nut
Installation Tool
The PH2 Philips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
RIGOL
6 7 8
1 2 6
3 4 5
7 8
Installation Guide RIGOL
2
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 3U (133.5mm).
The depth of the cabinet should be at least 600mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
Note: Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
1. Dissemble the handle
Rotate the handle upright. Then, pull it out from the sides of the instrument to remove
it.
Installation Guide RIGOL
3
2. Mount the left and right plates
Align the detents of the left and right plates with the openings on both sides of the
bottom plate respectively and insert them into the bottom plate, then fasten them
using eight M4 screws.
3. Place the instrument
Align the rear rubber pads with the specified slots on the bottom plate and ensure the
slots engage the rubber pads.
4. Fasten the instrument
Put two retaining brackets onto the bottom plate and fasten the instrument with four
M4 screws.
Installation Guide RIGOL
4
5. Mount the front plate
Attach the front plate to the assembled rack, and fasten the front plate with four M4
screws.
6. Get encased in the cabinet
Mount the assembled instrument and rack into a standard 19-inch cabinet using four
M6 screws and four M6 square nuts.
-End-
Product Specifications
| Brand: | Rigol |
| Category: | SLR camera |
| Model: | DG5251 |
Do you need help?
If you need help with Rigol DG5251, ask a question below and other users will answer you
SLR camera Rigol User Manuals
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
SLR camera User Manuals
- SLR camera Samsung
- SLR camera Tamron
- SLR camera Gram
- SLR camera Chauvin Arnoux
- SLR camera Generac
- SLR camera Kern
- SLR camera Toro
- SLR camera Esab
- SLR camera Sym
- SLR camera Buzz Rack
- SLR camera BOB Gear
- SLR camera Sky Rider
- SLR camera Interstuhl
Latest SLR camera User Manuals
25 October 2024
19 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024