Kicker 10PS52504 Manual

Kicker Speaker 10PS52504

Read below 📖 the manual in Italian for Kicker 10PS52504 (12 pages) in the Speaker category. This guide has been helpful for 6 people and has been rated 4.5 stars on average by 2 users

Page 1/12
PS COAXIALS
PS5250 | PS52504
English Version
Versión Español
Altavoces Coaxiales PS
Deutsche Version
PS Koaxial-Lautsprecher
Version Francaise
Haut-parleurs Coaxiale PS
LIVIN’ LOUD
2PS COAXIALS
PS COAXIAL SPEAKERS
Owner’s Manual
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Woofer Size 5-1/4” [133mm]
Tweeter Size 3/4” [20mm]
Frequency Response 60Hz–20kHz
Max Amplifi er Power 100W PEAK | 50W RMS
Sensitivity [1W/1m] 88.3dB
Nominal Impedance 2 (PS5250), 4 (PS52504)Ω Ω
Weight 12.6oz [358g]
Mounting Hole Diameter 4-7/8” [124mm]
Mounting Depth 2-3/16” [56mm]
2 PS5250 Harley-Davidson® with premium audio system and similar touring bikesΩ2006–present
4 PS52504 Harley-Davidson with premium audio system [Ω1998–2005 Road Glide may require Harley-
Davidson parts 77021-98B and 77022-98B]
2008–present Victory
Please refer to your bike’s factory service manual for dissassembly/installation information. Typically, you should
retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The following
diagrams show how to install the PS5250 speakers in a Harley-Davidson bike with “batwingstyle fairing (2006–
present). Note: Do not install in systems that are not 2-ohm stable!
1. Remove front side of fairing.
7 x Torx T25
12
57
4 6
3
3
3. Prepare PS5250 for installation.
Install the KICKER badges onto the grilles; bend the rear posts to secure them in place.
For Harley “batwinginstallations, replace the factory grilles with KICKER grilles.
For all other Harley applications, use the factory grilles only.
2. Remove factory speakers.
Remove the factory speaker connectors.
Retain the 3 factory screws.
Remove the factory speakers from the factory angle mount (be careful not to damage the angle mount).
4. Install PS5250 in factory location.
Use the 3 factory screws.
Connect the factory speaker connectors to the PS5250 terminals.
Re-install your bikes front fairing in the reverse order you disassembled it.
factory speaker location
[ viewed from front of bike ]
factory speaker connectors
factory screws x 3
KICKER grille
recommended
badge location
factory angle
mount
factory grille
(remove for “batwing” only)
install short screw at
bottom
KICKER PS5250

Product Specifications

Brand: Kicker
Category: Speaker
Model: 10PS52504

Do you need help?

If you need help with Kicker 10PS52504, ask a question below and other users will answer you




Speaker Kicker User Manuals

Kicker

Kicker 40PS694 Manual

14 October 2024
Kicker

Kicker 10PS52504 Manual

14 October 2024
Kicker

Kicker 40PS44 Manual

14 October 2024
Kicker

Kicker 44KMTC9W Manual

14 October 2024
Kicker

Kicker 44KMTC11W Manual

14 October 2024
Kicker

Kicker 40PS42 Manual

14 October 2024
Kicker

Kicker 44KMTC11 Manual

14 October 2024
Kicker

Kicker 48KMXL69 Manual

14 October 2024
Kicker

Kicker 47KMFC11W Manual

14 October 2024
Kicker

Kicker 47KMFC9W Manual

14 October 2024

Speaker User Manuals

Latest Speaker User Manuals

DAP Audio

DAP Audio NRG-15SA Manual

27 October 2024
DAP Audio

DAP Audio NRG-8A Manual

27 October 2024
DAP Audio

DAP Audio Odin PM-01 Manual

27 October 2024
August

August WS150 Manual

27 October 2024
DAP Audio

DAP Audio NRG-15S Manual

27 October 2024
DAP Audio

DAP Audio PSS-106 Manual

27 October 2024
DAP Audio

DAP Audio Pure-12 Manual

27 October 2024
DAP Audio

DAP Audio NRG-10 Manual

27 October 2024
DAP Audio

DAP Audio Odin T-8A Manual

27 October 2024
DAP Audio

DAP Audio Pure-15AS Manual

27 October 2024