Imou Cell Go Full Color Manual
Read below š the manual in Italian for Imou Cell Go Full Color (12 pages) in the Camera category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users
Page 1/12
Failed to Connect to WiFi During Initial Setup Process
1. Conīrm at which Page you failed?
When you see this failure page, it is usually because the device Bluetooth cannot establish good
communication with the mobile phone Bluetooth.
You can try the following steps:
Step 1: Check if the indicator light of the device is īashing green slowly. If it
is not, you can press the device button again to activate the device.
Step 2: Press "Try Again" on the APP interface to try again.
If you still cannot set up successfully, please check the āReset Guideā and
re-add the device.
You can re-add the device after resetting it:
Step 1: Long press the device button to reset until you hear a beep and the green indicator
light īashes.
Step 2: Press āAdd Againā on the APP interface to -re add.
Step 3: Conīrm that you are connected to a 2.4GHz WiFi network and enter the correct WiFi
password
If you search for two WiFi with the same name in your WiFi list and one of them is displayed as 5G, do not connect to the 5G
WiFi, select the other one to connect.
If your router is dual-band, you can log in to the router settings on the web, turn oī the 5G Wi-Fi switch, and only keep 2.4G
Wi-Fi for connection. After the connection is successful, turn on 5G Wi-Fi again.
Step 4: Conīrm that the indicator light of the device is in the green light slow īashing state
during the network conīguration process. If it isnāt, you can short press the device button to
activate the device and make the device īash green slowly again.
Step 5: The green light is always on, and the device is successfully connected to the router.
If you still cannot set up successfully, please contact our imou support team and Please
provide a screenshot of your failed interface and indicator status of battery camera.
When you see this failure interface, it is usually caused by the inability to establish a connection between
the device and the cloud platform.
1. If the network environment has changed, you can reset the device and enter the network settings to reconīgure
the network.
2. If the addition fails, you can reset the device and enter the network settings to reconīgure the network.
When do I need to RESET the device to Re-add?
Reset button for different Imou battery cameras
Press and hold the Reset button for about 5 to 10 seconds until you hear a beep and see the device indicator light slowly
īashing green, then the device is reset successfully.
Product Specifications
| Brand: | Imou |
| Category: | Camera |
| Model: | Cell Go Full Color |
Do you need help?
If you need help with Imou Cell Go Full Color, ask a question below and other users will answer you
Camera Imou User Manuals
15 October 2024
15 October 2024
15 October 2024
13 October 2024
Camera User Manuals
- Camera Samsung
- Camera Philips
- Camera Panasonic
- Camera Kogan
- Camera Kodak
- Camera Aplic
- Camera Canon
- Camera GoXtreme
- Camera Getac
- Camera UniView
- Camera Moultrie
- Camera Minolta
- Camera Elmo
- Camera Arlo
- Camera Linhof
- Camera Vimar
- Camera Agfaphoto
- Camera Konica Minolta
- Camera PTZ Optics
- Camera Fujifilm
- Camera AquaTech
- Camera HuddleCamHD
- Camera Camouflage
- Camera Bushnell
Latest Camera User Manuals
26 October 2024
26 October 2024
25 October 2024
22 October 2024
22 October 2024
19 October 2024
18 October 2024
15 October 2024
15 October 2024
15 October 2024