Hisense PX1TUK-PRO Manual

Read below 📖 the manual in Italian for Hisense PX1TUK-PRO (31 pages) in the Not categorized category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users

Page 1/31
USER MANUAL
Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.
English
A
Paragraphs beginning with the symbol indicate important instructions, tips or conditions for the following settings.
For your own safety and the optimal performance of your device, ensure to read the safety instructions before performing any
installation.
Compatibility with 3rd party products, software and services are not guaranteed. We cannot be held liable for any damage or loss
su󰀨ered whilst operating, using or connecting to incompatible devices or apps.
The recording and playback of content on this or any other device may require permission from the owner of the copyright or other
such rights in that content. It is your responsibility to ensure that your use of this or any other device complies with applicable
copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved
or contact the owner of the rights of the content you wish to record or playback.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.
â–ŒImportant Notice
â–ŒSafety Instructions
To ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and
damage to your unit:
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
B
The intended use and ambient conditions for this device
This device is intended for the rendering of video and audio signals, on a table-top, in a home or o󰀩ce environment. It must not be used in rooms
with a high level of humidity or dust concentration. The warranty is only valid if used as intended by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device. To reduce the risk of îš¿re or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do not place objects îš¿lled with liquids, such as vases, cups, etc. on or
over the unit.
- Do not touch the device with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked ames away from the device at all times.
If the device is moved from a cold environment to a hot environment, leave it switched o󰀨 for at least an hour to avoid condensation. If used outside,
make sure it is protected from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of îš¿re, use preferably a CO
2 gas or powder îš¿re extinguisher. If such extinguishers are not accessible, try to isolate the electrical supply before using a
water îš¿re extinguisher.
A Laser Cinema may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions
such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the Laser Cinema.
- ALWAYS use furniture that can safely support the Laser Cinema.
- ALWAYS ensure the Laser Cinema is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the Laser Cinema or its controls.
- ALWAYS route cords and cables connected to your Laser Cinema so they cannot be tripped over, pulled or grabbed.
- NEVER place a Laser Cinema in an unstable location.
- NEVER place the Laser Cinema on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and Laser Cinema to
a suitable support.
- NEVER place the Laser Cinema on cloth or other materials that may be located between the Laser Cinema and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the Laser Cinema or furniture on which the
Laser Cinema is placed.
If your existing Laser Cinema is being retained and relocated, the same considerations as above should be applied.

Product Specifications

Brand: Hisense
Category: Not categorized
Model: PX1TUK-PRO

Do you need help?

If you need help with Hisense PX1TUK-PRO, ask a question below and other users will answer you




Not categorized Hisense User Manuals

Hisense

Hisense 65WR6CE Manual

23 October 2024
Hisense

Hisense HP130 Manual

15 October 2024
Hisense

Hisense 55L35B5U Manual

14 October 2024
Hisense

Hisense MC086C Manual

14 October 2024
Hisense

Hisense HT002 Manual

14 October 2024
Hisense

Hisense A10 Manual

14 October 2024
Hisense

Hisense MH6INBG Manual

14 October 2024
Hisense

Hisense CH6IN6BXBG Manual

14 October 2024
Hisense

Hisense RB395N4WFE Manual

14 October 2024
Hisense

Hisense RS741N4WBE Manual

14 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals