Havis C-DMM-120 Manual

Read below 📖 the manual in Italian for Havis C-DMM-120 (7 pages) in the Not categorized category. This guide has been helpful for 9 people and has been rated 4.5 stars on average by 2 users

Page 1/7
C-DMM- 0_INST_7-12 rev 9- 12 13
INSTALLATION INSTRUCTIONS
C-DMM-120
2011-2017 FORD EXPLORER (RETAIL)
SWING-OUT DASH MONITOR MOUNT
***Does work in the Ford Interceptor Utility vehicle*** NOT
Always!
Read all instrucons before installing any Havis, Inc. products.
Check for obstrucons (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
The Dash Monitor Mount bracket system requires two or three main parts that are sold
separately. See web site Monitor Congurator for more detailed bracket informaon.
hp://www.havis.com/monitor_mounts.htm
1 123)- Vehicle Specic dash mount bracket. (C-DMM-
1 - Computer Specic Monitor adaptor bracket. (C- -200 series) MM
1 - Oset adaptor bracket. (C- -301) MM
The C- -301 oset adaptor goes between the C-DMM-123 and C- -2XX. MM MM
It may not be required in some applicaons.
Docking staons for tablet applicaons can be bolted directly to C-DMM without adaptor. Oset
adaptor C- -303 is available if addional posioning opons are desired for docking staon.MM
TOOLS REQUIRED:
• Ratchet Wrench Air Saw or Plasc cung tool
• Socket Set Dash panel removal tool
• Open End Wrench 7/16”- File
• Phillips Screwdriver
HARDWARE and PARTS:
QTY: DESCRIPTION: PART #:
1 Main Frame Assembly CM004267
1 Upper Support Bracket Driver Side CM004263
1 Upper Support Bracket Passenger Side CM004264
1 Lower Support Bracket Driver Side CM004265
1 Lower Support Bracket Passenger Side CM004266
4 1/4" Serrated Flange Hex Nut GSM30023
4 # 10 x 1/2" Phillips Pan head machine screw GSM33118
4 # 10 Star Washer GSM31034
1 Monitor Adapter Hardware Varies (monitor specic)
Note: The swing door ulizes a gas spring to assist in opening the door and to eliminate the possibility of it
slamming shut. If addional damping is desired because of heavier equipment, an oponal stronger gas spring is
available under Part Number CM86662-30 (sold separately)
Installer must change out gas spring as needed
C-DMM- 0_INST_7-12 rev 9- 12 13
CM004263 Upper Support Bracket
Driver Side
CM004265 Lower Support Bracket
Driver Side
C- -301 MM
Offset adaptor
C- -201 MM
Monitor Mount Adaptor
(VESA bracket shown)
CM004267 Main frame for Retail
Explorer
C-DMM- 0_INST_7-12 rev 9- 12 13
Carefully remove (unsnap) passenger side
Dash trim bezel. Trim removal tool and 90° picking
tool recommended.
Unplug and remove center control panel
Aach driver and passenger side upper support
bracket with OEM display screws. Driver side shown.
Torque to 3 Nm (27 in-lbs)
Remove screws holding center control panel.
(7mm socket)
Carefully remove (unsnap) driver side
Dash trim bezel.

Product Specifications

Brand: Havis
Category: Not categorized
Model: C-DMM-120

Do you need help?

If you need help with Havis C-DMM-120, ask a question below and other users will answer you




Not categorized Havis User Manuals

Havis

Havis C-SW-3 Manual

15 October 2024
Havis

Havis PT-A-912 Manual

15 October 2024
Havis

Havis DS-GTC-212-3 Manual

15 October 2024
Havis

Havis CST00200 Manual

15 October 2024
Havis

Havis C-DMM-122 Manual

15 October 2024
Havis

Havis C-DMM-130 Manual

15 October 2024
Havis

Havis C-SW-2 Manual

15 October 2024
Havis

Havis DS-GTC-211-3 Manual

15 October 2024
Havis

Havis SC-1000-PB Manual

15 October 2024
Havis

Havis DS-PAN-903 Manual

15 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals