Flex LBP 125-15 18-EC C Manual
Flex
Grinding machine
LBP 125-15 18-EC C
Read below ๐ the manual in Italian for Flex LBP 125-15 18-EC C (10 pages) in the Grinding machine category. This guide has been helpful for 8 people and has been rated 4.5 stars on average by 2 users
Page 1/10

ASHLY AUDIO INC.
847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010
Toll-Free: (800) 828-6308 Fax: (585) 872-0739 ashly.com

Operating Manual - Pema Protea Equipped Media Ampli๎ฟer
2
Important Safety Instructions
Consignes de sรฉcuritรฉ ร lire attentivement
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons. The exclamation point
within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance instructions in the literature ac-
companying the device.
Le symbole de la flรจche dans un triangle รฉquilateral symbolisant la foudre
est prรฉvu pour sensibiliser lโutilisateur ร la prรฉsence de tension de voltage
non isolรฉe ร lโintรฉrieur de lโappareil. Elle pourrait constituer un danger de
risque de dรฉcharge รฉlectrique pour les utilisateurs. Le point dโexclamation
dans le triangle รฉquilatรฉrale alerte lโutilisateur de la prรฉsence de consignes
quโil doit dโabord consulter avant dโutiliser lโappareil.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. To reduce the risk of ๎re or electric shock, do not expose this apparatus to
rain or moisture.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with the manu-
facturerโs instructions.
9. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not ๎t into your
outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12. Only use attachments/accessories speci๎ed by the manufacturer.
13. Use only with the cart, stand, tripod, bracket, or table speci๎ed by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to quali๎ed service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Observez les avertissements.
4. Suivez ces instructions.
5. Pour rรฉduire le risque de feu ou la dรฉcharge รฉlectrique, ne pas exposer cet
appareil pour pleuvoir ou l'humiditรฉ.
6. Ne pas utiliser lโappareil prรจs de lโeau.
7. Le nettoyer ร lโaide dโun tissus sec.
8. Ne pas bloquer les ouvertures de ventilation, installer selon les consignes du
fabricant.
9. Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres appareils
qui produisent de la chaleur.
10. Ne pas modi๎er ou amputer le systรจme de la mise ร terre. Une prise avec
mise ร terre comprend deux lames dont une plus large ainsi quโune mise ร
terre: ne pas la couper ou la modi๎er. Si la prise murale nโaccepte pas la ๎che,
consulter un รฉlectricien pour quโil remplace la prise dรฉsuรจte.
11. Protรฉger le cordon de secteur contre tous bris ou pincement qui pourraient
lโendommager, soit ร la ๎che murale ou ร lโappareil.
12. Nโemployer que les accessoires recommandรฉs par le fabricant.
13. Nโutiliser quโavec les systรจmes de ๎xation,chariots, trรฉpied ou autres, ap-
prouvรฉs par le fabricant ou vendus avec lโappareil.
14. Dรฉbrancher lโappareil lors des orages รฉlectriques ou si inutilisรฉ pendant une
longue pรฉriode de temps.
15. Un entretient effectuรฉ par un centre de service accrรฉditรฉ est exigรฉ si
lโappareil a รฉtรฉ endommagรฉ de quelque faรงon: si il a รฉtรฉ exposรฉ ร la pluie,,
lโhumiditรฉ ou sโil ne fonctionne pas normalement ou quโil a รฉtรฉ รฉchappรฉ.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in both a commercial and residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help..

3
Operating Manual - Pema Protea Equipped Media Ampli๎ฟer
WARNING:
THIS APPARATUS MUST BE EARTHED
Table Of Contents
1 Introduction and Unpacking ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎4
2 Pema Ampli๎ฟer Models ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎5
2๎1 Product Overview ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 5
2๎2 Installation Requirements ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 5
2๎3 Ethernet Communications Requirements ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 5
2๎4 Front Panel Features ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 6
2๎5 Rear Panel Features ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 7
2๎6 Ampli๎ฟer Protection ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 8
3 Proteane Control Software ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎8
3๎1 Installing Software ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 8
3๎2 Device Options ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 10
3๎3 Preset Options ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 10
3๎4 Device Control Tabs ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 11
3๎4a Control Surface๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 11
3๎4b Security ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 13
3๎4c Network Properties ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 13
3๎4d DSP Controls ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 14
3๎4e Input Source ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 16
3๎4f Metering ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 16
3๎4g Event Scheduler ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 16
3๎4h Fault Log ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 16
4 Pema Remote Control ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ 17
4๎1 Remote Control Devices ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 17
4๎1a WR-1 Level Control ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 17
4๎1b WR-1๎5 Level Control and Preset Recall Switch ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 17
4๎1c WR-2 Preset Recall Switches๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 17
4๎1d WR-5 Programmable Button Control (and RPS-18 Remote Power Supply) ๎ ๎ ๎ ๎ 17
4๎1e RD-8C or RW-8C Programmable Fader Controller ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 18
4๎1f INA-1 Inline RS-232 Adapter๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 18
4๎1g neWR-5 Networked Programmable Button Controller๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 18
4๎1h FR-8 or FR-16 Programmable Fader Controller ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 18
4๎1i Ashly Remote Application for iPad
ยฎ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ 18
4๎2 Remote Control Functions ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 19
4๎2a Power Switch Disable๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 19
4๎2b On/Off Remote Standby๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 19
4๎2c Remote Preset Recall ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 20
4๎2d Remote Gain Control ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 20
4๎2e Remote Channel Mute ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 21
4๎2f Remote Zone Input Source Selection ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ ๎ 21
5 Troubleshooting ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎22
6 Speci๎ฟcations ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ 24
7 Warranty๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ 27
8 Block Diagram ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ 28
Product Specifications
Brand: | Flex |
Category: | Grinding machine |
Model: | LBP 125-15 18-EC C |
Do you need help?
If you need help with Flex LBP 125-15 18-EC C, ask a question below and other users will answer you
Grinding machine Flex User Manuals

17 October 2024
Grinding machine User Manuals
- Grinding machine Bosch
- Grinding machine DeWalt
- Grinding machine Hazet
- Grinding machine Rikon
- Grinding machine Milwaukee
- Grinding machine Makita
- Grinding machine Einhell
- Grinding machine Metabo
- Grinding machine Worx
- Grinding machine Black And Decker
- Grinding machine Powerplus
- Grinding machine Profitec
- Grinding machine Hikoki
- Grinding machine Goon
- Grinding machine Duro Pro
- Grinding machine Handwerk
- Grinding machine McKenzie
- Grinding machine Classic Power
- Grinding machine Bavaria By Einhell
- Grinding machine United Office
Latest Grinding machine User Manuals

27 October 2024

27 October 2024

27 October 2024

27 October 2024

27 October 2024

27 October 2024

27 October 2024

27 October 2024

27 October 2024

26 October 2024