Elba ETC-E2700 Manual
Read below 📖 the manual in Italian for Elba ETC-E2700 (1 pages) in the Crane category. This guide has been helpful for 4 people and has been rated 4.5 stars on average by 2 users
Page 1/1
1. Install the intake (A) on the wall.
2. Put the tape(C) around the screw threaded tube, cover the rosette (B) and screw into pipeline.
3. Connect water and check if the screw has been sealed tightly.
pipeline
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure di erences between hot and cold water ff
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETC-E2700
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Cold Water Tap
Product Specifications
| Brand: | Elba |
| Category: | Crane |
| Model: | ETC-E2700 |
Do you need help?
If you need help with Elba ETC-E2700, ask a question below and other users will answer you
Crane Elba User Manuals
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Crane User Manuals
- Crane IKEA
- Crane Franke
- Crane Axor
- Crane Elkay
- Crane Zurn
- Crane Sussex
- Crane Delta
- Crane Moen
- Crane Hansgrohe
- Crane Waltec
- Crane Graff
- Crane Grohe
- Crane Nodor
- Crane Zip
- Crane Oliveri
- Crane Gessi
Latest Crane User Manuals
24 October 2024
20 October 2024
16 October 2024
16 October 2024
16 October 2024
16 October 2024
16 October 2024
16 October 2024
16 October 2024
16 October 2024