DCS BND-CNR Manual
Read below 📖 the manual in Italian for DCS BND-CNR (2 pages) in the Barbecue category. This guide has been helpful for 3 people and has been rated 4.5 stars on average by 2 users
Page 1/2
BNDCNR BEND CORNER BRACKET
INSTALLATION INSTRUCTIONS
Before you begin, read these instructions completely and carefully.
Getting Started
Remove packaging
CONTENTS
Eye Goggles
Screwdriver - Phillips #2
7/16” Socket and Ratchet Driver
7/16” Box or Open End Wrench
Description Qty
Bracket Top 1
Bracket Leg 2
Machine Screw #10-24 x 3/4” Phillips 4
Hex Nut 1/4-20 4
Washer 5/16 ID x 3/4 OD 4
Hex Bolt 1/4-20 x 3/4” 4
BND-CNR :
The BND-CNR is composed of three main pieces (one large 1.
bracket top and two bracket legs) that are held together using
four bolts and nuts. The bracket is mounted to the bend units
with four screws (Fig. 01).
Mounting of the BND-CNR bracket requires two CAD-BND 2.
bend units mounted with a CAD-30 cart between them and
any size CAD cart or refrigeration unit with wrapper on the
outer sides. When assembled, this conguration will provide
a solid base to which the BND-CNR bracket can be safely
mounted. The assembly should look similar to the image
below (Fig. 02).
Note: Before beginning installation, remove screws holding the rear of the center outdoor appli-
ance and cart to prevent damage (Fig. 03). Ensure the grill head is secured to the front of the
cart behind the drip pan.
Fig. 02
TOOLS NEEDED
Installation Instructions
Fig. 01
Fig. 03
Over. . .
CAD-BND CAD30 with
outdoor
appliance CAD-BND
Fisher & Paykel Appliances, Inc.
5900 Skylab Road, Huntington Beach, CA 92647
Customer Care: 888.281.5698 • Fax: 714.372.7003
www.dcsappliances.com P/N 242803 RA
Attach the legs to the backs of the bend units using the provided mounting screws (#10-24 x 1/2” Phillips 3.
Machine Screws). Position the legs on the bend units so that the screws are fed through the outer holes
on the bracket legs (Fig. 04).
Once the legs are securely mounted to the bend units, place the large 4. bracket top on top of the legs
(Fig. 05). The bracket top should rest safely on the legs while you secure the parts together.
Note: DO NOT place any weight on the shelf until step 5 is complete.
With the large 5. bracket top in place, secure the bracket top to the bracket legs using the hex bolt (1/4-20 x
3/4”), the washers (5/16 x 3/4 ) and hex nuts (1/4-20); bolt through the protruding plates on the legs, into
the bracket top (Fig. 05). Once secure, the solid surface can then be placed on the bend corner bracket.
Fig. 04 Fig. 05
ACCEssORiEs REQuiRED:
Solid Surface for Corner Shelf (BND-CNRT)
For alternate types and/or colors of solid surface, contact your local manufacturer and provide the attached
drawing (Fig. 06).
43.42”
.50”
ALL WALLS
R .250
ON ALL CORNERS
AND TOP EDGES
30.85”
90.00°
45.00°
C
L
SYMM
*1.30”
61.19”
*
DIMENSIONS ARE CRITICAL
Fig. 06
CAD-30
(center)
Bend Unit
Product Specifications
| Brand: | DCS |
| Category: | Barbecue |
| Model: | BND-CNR |
Do you need help?
If you need help with DCS BND-CNR, ask a question below and other users will answer you
Barbecue DCS User Manuals
13 October 2024
Barbecue User Manuals
- Barbecue Electrolux
- Barbecue IKEA
- Barbecue Artusi
- Barbecue Roesle
- Barbecue Grill Guru
- Barbecue Euro Appliances
- Barbecue Hendi
- Barbecue XO
- Barbecue Tower
- Barbecue Dometic
- Barbecue Fisher And Paykel
- Barbecue Brentwood
- Barbecue Jenn-Air
- Barbecue Crossray
- Barbecue Kucht
- Barbecue BeefEater
- Barbecue EVO
- Barbecue Outdoorchef
- Barbecue Fieldmann
- Barbecue Mirpol
- Barbecue Yato
- Barbecue Lund
- Barbecue Maxxus
- Barbecue Brenner
- Barbecue Campart
- Barbecue Jamie Oliver
- Barbecue Char-Griller
- Barbecue Twin Eagles
Latest Barbecue User Manuals
25 October 2024
25 October 2024
24 October 2024
24 October 2024
24 October 2024
24 October 2024
23 October 2024
21 October 2024
20 October 2024
20 October 2024