Code CR900FD Manual
Code
Barcode reader
CR900FD
Read below 📖 the manual in Italian for Code CR900FD (2 pages) in the Barcode reader category. This guide has been helpful for 7 people and has been rated 4.5 stars on average by 2 users
Page 1/2
Using the CR900FD in a Universal Stand
The CR900FD has a stand detecon feature. By
default, when the CR900FD is placed in the stand,
the reader will automacally enter into moon
detecon mode. When in this mode, simply place
a bar code in the scan eld to acvate the reader.
The CR900FD will beep and ash a green LED to
indicate a ‘good read’ has occurred.
When the CR900FD is removed from the stand,
the reader switches to manual mode and the
trigger must be pressed to read a bar code.
Press and hold the CR900FD trigger, the two
blue bars eming from the reader are used for
targeng. Center the blue bars in the middle of
a bar code.
The opmal reading distance from reader to bar
code is approximately 4.0” (10 cm).
For USB Cable: plug the USB end of the Anity® cable into a USB port on the host device.
Aer several seconds, the reader will beep twice and the LED will turn o to indicate the
CR900FD is ready for use.
For RS232 Cable: plug the power supply into the AC outlet, plug the power supply cord into
the barrel jack of the cable, and connect the RS232 connector to the appropriate serial port
on the host device. Aer several seconds, the reader will beep twice and the LED will turn o
to indicate the CR1400 is ready for use.
Using the CR900FD Out of a Universal Stand
Powering on the CR900FD CR900FD Default Sengs
UPC/EAN/JAN
Code 39
Code 93
The CR900FD, out of the box, will read the following 1D bar codes:
The CR900FD can be upgraded to read 2D bar codes with the purchase of a license key. 2D
license keys can be purchased individually or as a package. Available licenses:
Conguraon Codes
Once the reader is at the opmal distance, the CR900FD will read the bar code (when the
trigger is pressed). The CR900FD will beep and ash a green LED to indicate a ‘good read’ has
occurred.
2 3
Code 128
Interleaved 2 of 5
Codabar
GS1 DataBar (RSS)
PDF417
Data Matrix
QR Code
Aztec Code
All 2D bar codes
Visit www.codecorp.com for upgrading/license key informaon.
Upgrade Opons
Note: a CR900FD will read Data Matrix conguraon codes.
The CR900FD can be quickly, and easily congured to meet the needs of dierent use cases.
A common conguraon is reading bar codes found on cell phone screens. To enable, or
disable, cell phone reading mode, scan the appropriate code below.
For more conguraon opons refer to the CR900FD Conguraon Guide located at
www.codecorp.com. For custom conguraon opons, please contact us at
support@codecorp.com.
Enable Cell Phone Reading Mode Disable Cell Phone Reading Mode
Quickstart Guide
C007258_02_CR900FD_Quickstart_Guide
Code Reader™ 900FD (CR900FD)
USB Anity® Cable RS232 Anity® Cable
w/ Power Supply
Aaching/Detaching a Cable
To aach a cable, plug the RJ-50 end of the Anity® cable into boom of the reader (Figure
1). Firmly push the connector into the reader unl a snap can be heard, to indicate the cable
is properly aached. To detach a cable, press a paper clip into the hole on the back of the
CR900FD (Figure 2), and gently pull the cable from the reader.
Figure 2Figure 1
Included with your CR900FD
Depending on the kit ordered, the following may have been shipped with your reader:
Universal Stand
Universal Stand Assembly (included when ordered as a Kit/Package)
Cleaning a CR900FD
The following agents are approved to clean a Code bar code reader:
1) Alcohol Wipes
2) CaviWipes® Disinfecng Towelees
3) Clorox® Disinfecng Wipes
4) Clorox® Bleach Soluon (10% Clorox bleach, 90% tap water)
5) Medical DiAirKem
6) Sani-Cloth® HB, Super Sani-Cloth® Germicidal, Sani-Cloth® Plus Germicidal Disposable Wipes
7) Virex® II Disinfectant Cleaner
Warranty
Code’s CR900FD carries a ve year standard warranty. Universal Stands follow the warranty
of the reader, and cables have a 90 day warranty period. For more warranty informaon,
please refer to the www.codecorp.com.
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
© 2012. Code Corporaon. All Rights Reserved. 4
Product Specifications
| Brand: | Code |
| Category: | Barcode reader |
| Model: | CR900FD |
Do you need help?
If you need help with Code CR900FD, ask a question below and other users will answer you
Barcode reader Code User Manuals
26 October 2024
26 October 2024
Barcode reader User Manuals
- Barcode reader Posiflex
- Barcode reader Brady
- Barcode reader Manhattan
- Barcode reader Newland
- Barcode reader Wasp
- Barcode reader Datalogic
- Barcode reader Datamax-O'neil
- Barcode reader Bluebird
- Barcode reader Qian
Latest Barcode reader User Manuals
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
22 October 2024
21 October 2024
14 October 2024
14 October 2024
14 October 2024