Axton A894DSP Manual
Read below 📖 the manual in Italian for Axton A894DSP (19 pages) in the Receiver category. This guide has been helpful for 6 people and has been rated 4.5 stars on average by 2 users
Page 1/19
8.1 CHANNEL CLASS-D
CAR AMPLIFIER
SMART DSP
Installation & Operation Manual / Einbau- & Bedienungsanleitung
A894DSP
– 2 –
SAFETY INSTRUCTIONS
·Keep the product away from children before installation. The inner packaging of the product could pose
a hazard. E.g. due to small parts of the accessories that can be swallowed.
·Depending on their size, polybags inside the packaging must be kept away from small children due to
the possible risk of suffocation.
·This product is designed exclusively for operation with an on-board voltage of 12 V direct current (DC).
If the product is operated with other on-board voltages, this may result in damage to the product or the
vehicle electrical system.
·Follow the manufacturer's instructions in the installation manual. Specific knowledge and tools are required
for installation. Improper installation can lead to damage to the vehicle and the infotainment system.
·Incorrectly installed car audio amplifiers pose a danger to the occupants, as they can come loose in the
event of an accident and injure people.
·Electrically incorrectly connected car audio components pose a short-circuit hazard with possible fire
consequences. Follow the wiring instructions in the installation manual carefully or have the product
installed by a specialist dealer.
·Proper functioning can only be guaranteed if you use the original accessories included in the scope
of delivery.
·The product and the original accessories must not be modified or altered in any way. Improper modifi-
cations can lead to damage to the vehicle and the product.
·Please note that this car audio amplifier generates heat or waste heat during operation and look for a
location for installation and mounting that ensures good ventilation of the product.
·Prolonged listening sessions at high to very high levels at short intervals can lead to permanent hearing loss.
·Road users must be able to hear traffic at all times while driving, e.g. to be able to recognize acoustic
warning signals such as horns or sirens from the police, ambulance, fire department and other emer-
gency services.
·The amplifier must not be opened and/or modified by unauthorized persons. The voltages and currents
inside the device can be life-threatening.
·Do not use the device in places where wireless devices are not permitted.
·AXTON cannot guarantee that accidents or damage will not occur due to improper use of the device.
Use this product with care and at your own risk.
Operating frequency / maximum transmission power
This is a product with an integrated Bluetooth module, class 2.
Bluetooth
Bluetooth standard: 5.0
Transmission frequency band: 2402 MHz ~ 2480 MHz
Bluetooth class: Class 2
Transmission power: 4 dBm / 2.5 mW
Information on radio frequency exposure
This device complies with EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the
general public to electromagnetic fields for the purposes of health protection.
– 4 –
Thank you for purchasing this innovative AXTON amplifier!
To maximize the performance of this amplifier and your complete car audio system installation,
we recommend you acquaint yourself thoroughly with all technical features and controlling op-
tions of this AXTON amplifier. Please read this manual carefully, before attempting the installation.
If, after reading this manual, you still have questions regarding functions or the installation of the
amplifier, we recommend you consult your dealer.
MOUNTING INSTRUCTIONS
1. Before you start with the installation, make sure you know the security code of your headunit
(if applicable).
2. Remove the headunit from the dashboard and disconnect the main wire harness.
3. Find a place for the A894DSP and connect the optionally available car-specific wire harness
to the amp.
4. Run a 16 mm2 power wire from the (+) pole of the battery to the (B+) terminal of the
amplifier. Use a fuse with a value of min. 30A and max. 50 A. The distance between the B+
pole and the fuse holder must be 30 cm or less. Run the minus cable with the same cross
section from the (GND) terminal of the amp to the vehicle chassis ground, but NOT to the
B-pole of the battery. Make sure that the chassis ground contact surface is clean in order to
get best conductance.
5. Optionally: For Hi-Res Sound from your smartphone: Connect the optical and coaxial cables
to the inputs of A894DSP and outputs of the AXTON ABT50. Connect your smartphone
via Bluetooth to the ABT50 for using APTX-HD standard or use the AXTON OTG cable for
absolutely lossless audio transmission: the signal is sent from your smartphone directly to the
amplifier without passing any D/A converter.
6. Optionally: Connect the remote control for convenient operation of the Master Volume, Bass
Extender and Mute function. Recommended when using A894DSP without any headunit.
7. Connect the wire to the headunit.
8. Install the headunit back in the dashboard.
Stand-alone installation
When you intend to use the A894DSP without any headunit, please connect the provided
cable and connect the wires according to the wiring diagram*. Switch (6)* is to be set to
“Remote turn on”.
*see page 6
Product Specifications
| Brand: | Axton |
| Category: | Receiver |
| Model: | A894DSP |
Do you need help?
If you need help with Axton A894DSP, ask a question below and other users will answer you
Receiver Axton User Manuals
13 October 2024
Receiver User Manuals
- Receiver Sony
- Receiver Bosch
- Receiver Brondi
- Receiver Jensen
- Receiver Hartke
- Receiver Goobay
- Receiver Avantree
- Receiver Cayin
- Receiver Kogan
- Receiver Yamaha
- Receiver Extron
- Receiver Lindy
- Receiver Pioneer
- Receiver NuPrime
- Receiver Ecler
- Receiver AudioControl
- Receiver Rotel
- Receiver Toa
- Receiver Marantz
- Receiver Pyle
- Receiver Wet Sounds
- Receiver JVC
- Receiver VMV
- Receiver S.M.S.L
- Receiver Kicker
- Receiver Auna
- Receiver OSD Audio
- Receiver Power Dynamics
- Receiver DataVideo
- Receiver Audizio
- Receiver Vonyx
- Receiver Bluesound
- Receiver Blackstar
- Receiver Cambridge
- Receiver MB Quart
- Receiver Aplic
- Receiver CSL
- Receiver NUVO
- Receiver Block
- Receiver Smart-AVI
- Receiver Advance
- Receiver Artsound
- Receiver Denon
- Receiver Yorkville
- Receiver Valcom
- Receiver Mosconi
- Receiver JBL
- Receiver Helix
- Receiver Soundstream
- Receiver Bellari
- Receiver Rolls
- Receiver Ground Zero
- Receiver Karma
- Receiver Glemm
- Receiver EA
- Receiver Match
- Receiver Renkforce
- Receiver Scansonic
- Receiver SPL
- Receiver Audiotec Fischer
- Receiver Crunch
- Receiver A-NeuVideo
- Receiver Classé
- Receiver FoneStar
- Receiver Monitor Audio
- Receiver Peavey
- Receiver Crown
- Receiver Fosi Audio
- Receiver Graupner
- Receiver Antelope Audio
- Receiver Vaddio
- Receiver ESX
- Receiver Omnitronic
- Receiver Russound
- Receiver MEE Audio
- Receiver GigaBlue
- Receiver Mx Onda
- Receiver Black Hydra
- Receiver Electro-Voice
- Receiver Boss
- Receiver JL Audio
- Receiver Shanling
- Receiver Atlas Sound
- Receiver Ashly
- Receiver Audiolab
- Receiver Memphis Audio
- Receiver AVM
- Receiver Primare
- Receiver PureLink
- Receiver Kramer
- Receiver ATen
- Receiver Blustream
- Receiver Yaesu
- Receiver Musical Fidelity
- Receiver RDL
- Receiver Dynacord
- Receiver Ferguson
- Receiver DAP Audio
- Receiver REL Acoustics
- Receiver Inovonics
- Receiver BZBGear
- Receiver Ram Audio
- Receiver Strong
- Receiver Phoenix Gold
- Receiver HiFi ROSE
- Receiver Intelix
- Receiver Comprehensive
- Receiver Deaf Bonce
- Receiver Fiio
- Receiver Lab Gruppen
- Receiver GlobalSat
- Receiver AVMATRIX
- Receiver Koda
- Receiver Technical Pro
- Receiver Marshall Electronics
- Receiver Naim
- Receiver Anthem
- Receiver Audison
- Receiver Hifonics
- Receiver Geemarc
- Receiver Loxjie
- Receiver Clare Controls
- Receiver Edwards Signaling
- Receiver Hegel
- Receiver August
- Receiver PTN-electronics
Latest Receiver User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024