AXESS AXDSPX-MZ1 Manual

AXESS Not categorized AXDSPX-MZ1

Read below 📖 the manual in Italian for AXESS AXDSPX-MZ1 (39 pages) in the Not categorized category. This guide has been helpful for 7 people and has been rated 4.5 stars on average by 2 users

Download PDF

Page 1/39

AXDSPX-MZ1

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Installation Options ...............................................2

Installation .............................................................2

Connections ........................................................3-4

Mobile App ........................................................ 5-13

Speciﬁcations ....................................................... 14

Mazda DSP Interface With Pre-Wired Harness

2010-Up

• Includes a DSP (Digital Signal Processor)

• 31 Band graphic EQ

• 10 individually assignable outputs

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass ﬁlters

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Can be used in ampliﬁed and non-ampliﬁed models

• Easy behind the radio installation with pre-wired harness

• Bass knob included for level control of subwoofer amp

• Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• AXDSPX-MZ1 interface

• AXDSPX-MZ1 interface harness

• AXDSPX-MZ1 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

Adding a sub to a factory system:

This feature offers the ability to add a subwoofer to a factory system, whether ampliﬁed or non-

ampliﬁed. (refer to page 3)

Adding a full-range amp & sub to a factory system:

This feature offers the ability to add a full-range amp and sub to a factory system, whether

ampliﬁed † or non-ampliﬁed. (refer to page 4)

† For ampliﬁed models the amp must be bypassed/unplugged, and chosen in With OE Ampliﬁer

the Conﬁguration Vehicle Type tab under .

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

1. Remove the factory radio †, then unplug all connectors.

2. Install the AX-DSPX-MZ1 vehicle T-harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. AX-DSPX-MZ1 vehicle T-harness AX-DSPX-MZ1 interface Plug the to the .

4. Plug the AX-DSPX-MZ1 interface harness to the AX-DSPX-MZ1 interface.

5. Download and install the AXDSP-X app from the Google Play Store Apple App or

Store.

6. Bluetooth Connection Open the app then select the tab. Follow the instructions to

pair the mobile device to the interface. Refer to page 6 for more information.

7. Scroll to the Conﬁguration tab then select the vehicle type. Press the ‡ Lock Down

button to save the conﬁguration. Refer to page 7 for more information.

8. Connect the amp turn-on wire.

9. Adjust the settings in the app as desired. Press the ‡ button to save any Lock Down

new conﬁgurations.

† Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,

disassembly will be within those instructions.

‡ Anytime the interface is locked down the key must be cycled off then back on

INSTALLATION OPTIONS INSTALLATION

REV. 7/30/2020 INSTAXDSPX-MZ1

Factory Radio

Keep Connected

Any remaining wires

tape off and disregard

Black - Ground

Orange - Control

Bass Knob

Factory Radio Harness

Interface

Any remaining wires

tape off and disregard

Vehicle T-Harness

Blue/White - Amp Turn-On Wire

These outputs can be used for

additional sub amps, or for adding

onto the em at a later datesyst

RCA Jacks

(sold separately)

ADDING A SUB TO A FACTORY SYSTEM

ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM

SUB

Factory Radio

Factory Radio Harness

Interface Cut the male

connector off and

connect speaker

wires to amp

(non-amplified

models only)

White / Front Left +

White/Black / Front Left -

Gray / Front Right +

Gr /Blackay Front Right -

Green / Rear Left +

Green/Black / Rear Left -

Purple / Rear Right +

Purple/Black / Rear Right -

Any remaining wires

tape off and disregard

Vehicle T-Harness

Bass Knob

Blue/White - Amp Turn-On Wire

Unplug connector

Any remaining wires

tape off and disregard

Black - Ground

Orange - Control

Factory Amp

If equipped, bypass

and remove

An SP rela Metra part numberDT y,

E-123, is quired if the amp turn-onre

current of all amps eds 1-amp.exce

RCA Jacks

(sold separately)

Assignable Outputs Labeled CH 6-10

Interface Harness

REV. 7/30/2020 INSTAXDSPX-MZ1

MOBILE APP

Setup Instructions

• General information tab for installing the interface.

Continued on the next page

MOBILE APP (CONT.)

Bluetooth Connection

• - Press this button to start the Bluetooth pairing process, then select the interface Scan

once it is found. “Connected” will appear in the top left corner of the app once paired.

The ignition must be cycled on during this process.Note:

• - Disconnects the interface from the app.Disconnect

Continued on the next page

REV. 7/30/2020 INSTAXDSPX-MZ1

Continued on the next page

MOBILE APP (CONT.)

Conﬁguration

• - Click this button to send a test tone to the front left speaker*Identify

* Only installations using the front left output (white RCA jack).

• Reset to Defaults - Resets the interface to factory settings. During the reset process the amp(s)

will shut off for 5-10 seconds.

•

Vehicle Type - Select the vehicle type from the drop down box, then click the apply button

• - Click this button to save the selected settings.Lock Down

Attention! This must be done before closing the app or cycling the key otherwise all new

changes will be lost!

•

Save Conﬁguration - Saves the current conﬁguration to the mobile device

• Recall Conﬁguration - Recalls a conﬁguration from the mobile device.

• - Displays information about the app, vehicle, interface, and mobile device.About

• Set Password - Assign a 4-digit password to lock the interface. If no password is desired, use

“0000”. This will clear out any currently set password. It is not necessary to lock down the

interface when setting a password.

Note: A 4-digit only password must be chosen otherwise the interface will show “password

not valid for this device”.

MOBILE APP (CONT.)

Continued on the next page

Outputs

Output Channels

• Location - Location of speaker.

• Group -

Used to join channels together for simple equalization. Example, left

front woofer/midrange and left front tweeter will be considered simply left

front. The letter indicates the speaker assigned as the master speakerM

• Invert - Will invert the phase of the speaker.

• Mute - Will mute desired channel(s) for tuning individual channels.

MOBILE APP (CONT.)

Equalizer Adjust

• All channels can be adjusted independently within this tab with 31 bands of available

equalization. It is best to tune this by using an RTA (Real Time Analyzer).

• The slider on the far left is for the channel selected.Gain

Continued on the next page

REV. 7/30/2020 INSTAXDSPX-MZ1

MOBILE APP (CONT.)

Delay Adjust

• Allows a delay of each channel. If a delay is desired, ﬁrst measure the

distance (in inches) from each speaker to the listening position, then

enter those values to the corresponding speaker. Add (in inches) to

the desired speaker to delay it.

Continued on the next page

MOBILE APP (CONT.)

Inputs/Levels

Continued on the next page

• Chime Volume - Not applicable in this application.

• Clipping Level - Use this feature to protect sensitive speakers like tweeters from

being driven past their capabilities. If the output signal of the interface clips the

audio will be reduced by 20dB. Turning down the stereo will allow the audio to

come back at a normal level. The sensitivity of this feature can be adjusted to the

listening preference of the user.

• Amp Turn On

•

Signal Sense - Will turn the amp(s) on when an audio signal is detected, and keep on for

10 seconds after the last signal. This ensures the amp(s) won’t shut off between tracks

• - Will keep the amp(s) on as long as the ignition is cycled on.Always On

• Turn on Delay - Can be used to delay audio output to avoid turn-on pops.

• Subwoofer Input Front + Rear - Select

REV. 7/30/2020 INSTAXDSPX-MZ1

Locking Down Data

Last and the most important.

You must lock down your

conﬁguration and cycle the key!!!

MOBILE APP (CONT.)

SPECIFICATIONS

Input Impedance 1M Ohm

Input Channels 6

Input Options High Level or Low Level

Input Type Differential balanced

Input Voltage

0 - 28-volts (peak-to-peak)

(high level range)

Input Voltage 0 - 4.9-volts

(peak-to-peak)

(low level range)

Ouput Channels 10

Output Voltage Up to 5-volts RMS

Output Impedance 50 Ohms

Equalizer Type 31 Band Graphic EQ, +/- 10dB

THD <0.03%

Frequency Response 20Hz - 20kHz

Crossover 3-Way LPF, BPF, HPF THP per channel

Crossover Type Linkwitz-Riley 24db slope

Sampling 48kHz

S/N Ratio 105dB @ 5-volts RMS

Operating Voltage 10-16 volts DC

Standby Current Draw 7mA

Operation Current Draw 150mA

Adjustments/Controls Application via Bluetooth

Remote Output 12 volts DC (signal sense

or with ignition

REV. 7/30/2020 INSTAXDSPX-MZ1

K PNOWLEDGE IS OWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and spected re

mobile elect nics school in our industry.ro

Log onto www.installerinstitute.com or call

800-354-6782 for mo information and take steps re

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

I N S T A L L A T I O N I N S T R U C T I O N S

AXDSPX-MZ1

Having difﬁculties? We’re here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

Product Specifications

Brand:	AXESS
Category:	Not categorized
Model:	AXDSPX-MZ1

Do you need help?

If you need help with AXESS AXDSPX-MZ1, ask a question below and other users will answer you

Your Name*

Your Email*

Write your question here

Not categorized AXESS User Manuals

AXESS AXDSPX-BM1 Manual

25 October 2024

AXESS AXDIS-BW122 Manual

13 October 2024

AXESS 99-3303 Manual

13 October 2024

AXESS AXBT-MZ2 Manual

13 October 2024

AXESS AX-ALOC618 Manual

13 October 2024

AXESS ANC-GMH3 Manual

13 October 2024

AXESS ANC-GMH2 Manual

13 October 2024

AXESS ANC-CHH2 Manual

13 October 2024

AXESS AX-AB-CH3 Manual

13 October 2024

AXESS AX-AB-CH4 Manual

13 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals

NightStick LGL-170A Manual

27 October 2024

Supermicro SuperServer ASG-2115S-NE332R Manual

27 October 2024

Phanteks Glacier R220C Manual

27 October 2024

Elac Protek PR-71S Manual

27 October 2024

NightStick LGL-180-IR Manual

27 October 2024

United Office IAN 54183 Manual

27 October 2024

United Office IAN 066078 Manual

27 October 2024

United Office IAN 331845 Manual

27 October 2024

United Office ULGD 350 A Manual

27 October 2024

United Office UAVS 300 A1 Manual

27 October 2024