Whirlpool FFB 8259 SV GCC Manual
Whirlpool
Washing machine
FFB 8259 SV GCC
Read below 📖 the manual in Italian for Whirlpool FFB 8259 SV GCC (3 pages) in the Washing machine category. This guide has been helpful for 5 people and has been rated 4.5 stars on average by 2 users
Page 1/3
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing machine.
Do not use ammable uids to clean the washing machine.
CLEANING THE OUTSIDE OF THE WASHING MACHINE
Use a soft damp cloth to clean the outer parts of the washing
machine.
Do not use glass or general purpose cleaners, scouring
powder or similar to clean the control panel – these
substances might damage the printing.
CHECKING THE WATER SUPPLY HOSE
Check the inlet hose regularly for brittleness and cracks. If
damaged, replace it by a new hose available through our
After-Sales Service or your specialist dealer.
Depending on the hose type:
If the inlet hose has a transparent coating, periodically check
if the colour intensies locally. If yes, the hose may have a leak
and should be replaced.
For water stop hoses: check the small safety valve inspection
window (see arrow). If it is red, the water stop function was
triggered, and the hose must be replaced by a new one.
For unscrewing this hose, press the release button (if
available) while unscrewing the hose.
CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE
1. Close water tap and unscrew the inlet hose.
1
2
2. Clean the mesh lter at the hose’s end carefully with a
ne brush.
3. Now unscrew the inlet hose on the back of the washing
machine by hand. Pull out the mesh lter from the valve
on the back of the washing machine with pliers and
carefully clean it.
4. Insert the mesh lter again. Connect the inlet hose to
water tap and washing machine again. Do not use a tool
to connect the inlet hose. Open the water tap and check
that all connections are tight.
2
1
CLEANING THE DETERGENT DISPENSER
CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER
Switch o and unplug the washing machine before cleaning the water lter or draining residual water. If you used a hot
wash programme, wait until the water has cooled down before draining any water.
Clean the water lter regularly, to avoid that the water cannot drain after the wash due to obstruction of the lter.
If the water cannot drain, the display indicates that the water lter may be clogged.
1. Remove the kick panel: Using a screwdriver, do that which
is shown in the following gure.
2. Container for the drained water:
Place a low and wide container under the water lter in
order to collect the residual water.
3. Drain the water:
Slowly turn the lter counter-clockwise until all the water
has come out. Allow the water to ow out without
removing the lter. Once the container is full, close the
water lter by turning it clockwise. Empty the container.
Repeat the procedure until all the water has been drained.
4. Remove lter: Lay a cotton cloth beneath the water lter,
which can absorb a small amount of rest water. Then
remove the water lter by turning it out anticlockwise.
5. Clean the water lter: remove residues in the lter and
clean it under running water.
6. Insert the water lter and reinstall the plinth: Reinsert the water
lter again by turning it in clockwise direction. Make sure to turn
it in as far as it goes; the lter handle must be in vertical position.
To test water tightness of the water lter, you can pour about 1
liter of water into the detergent dispenser. Then reinstall the
plinth.
1
2
Remove the dispenser by raising it and pulling it out (see gure).
Wash it under running water; this operation should be repeated frequently.
1
2
1
2
1
2
1a
1b
2a
2b
3a
3b
4a
4b
A
B
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
1. Pull out the mains plug, and close the water tap.
2. Make sure that door and detergent dispenser are properly
closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and x them so that they cannot get
damaged during transport.
4. Ret the transport bolts. Follow the instructions for
removing the transport bolts in the “Installation Guide” in
reverse order.
Important: Do not transport the washing machine without
having xed the transport bolts.
AFTER-SALES SERVICE
BEFORE CALLING THE AFTER-SALES SERVICE
1. See if you can solve the problem by yourself with the help
of the suggestions given in the TROUBLESHOOTING
2. Switch the appliance o and back on again to see if the
fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL
OCCURS, GET IN TOUCH WITH THE NEAREST
AFTER-SALES SERVICE
To receive assistance, call the number shown on the warranty
booklet.
When contacting our Client After sales service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
xxxxxxxxxxxx
• the service number (number after the word Service on the
rating plate).
• your full address;
• your telephone number.
If any repairs are required, please contact an authorised after-
sales service (to guarantee that original spare parts will be used
and repairs carried out correctly).
Product Specifications
Brand: | Whirlpool |
Category: | Washing machine |
Model: | FFB 8259 SV GCC |
Do you need help?
If you need help with Whirlpool FFB 8259 SV GCC, ask a question below and other users will answer you
Washing machine Whirlpool User Manuals
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
Washing machine User Manuals
- Washing machine Candy
- Washing machine Electrolux
- Washing machine Samsung
- Washing machine LG
- Washing machine Bosch
- Washing machine AEG
- Washing machine IKEA
- Washing machine Panasonic
- Washing machine AEG Electrolux
- Washing machine Bauknecht
- Washing machine BEKO
- Washing machine Teka
- Washing machine Café
- Washing machine Balay
- Washing machine Miele
- Washing machine Siemens
- Washing machine Arcelik
- Washing machine Smeg
- Washing machine Hisense
- Washing machine Hoover
- Washing machine TCL
- Washing machine Hotpoint
- Washing machine Amica
- Washing machine Inventum
- Washing machine Artusi
- Washing machine Cecotec
- Washing machine Imarflex
- Washing machine Kogan
- Washing machine Caple
- Washing machine Midea
- Washing machine Sauber
- Washing machine Gorenje
- Washing machine Summit
- Washing machine Haier
- Washing machine Monogram
- Washing machine Vox
- Washing machine Westinghouse
- Washing machine Kluge
- Washing machine Grundig
- Washing machine MPM
- Washing machine Khind
- Washing machine Exquisit
- Washing machine Maytag
- Washing machine Defy
- Washing machine Hitachi
- Washing machine Hyundai
- Washing machine Chiq
- Washing machine Nevir
- Washing machine Infiniton
- Washing machine Indesit
- Washing machine Cylinda
- Washing machine Elba
- Washing machine Philco
- Washing machine ECG
- Washing machine Vivax
- Washing machine Element
- Washing machine Elektra Bregenz
- Washing machine Mx Onda
- Washing machine Meireles
- Washing machine Edesa
- Washing machine IFB
- Washing machine Profilo
- Washing machine Constructa
- Washing machine Tisira
- Washing machine Hiberg
- Washing machine Porter & Charles
- Washing machine LERAN
- Washing machine Zerowatt
- Washing machine Otsein-Hoover
- Washing machine Baumatic
- Washing machine Iberna
- Washing machine Otsein
- Washing machine Svan
- Washing machine Corberó
- Washing machine DAYA
- Washing machine Butler
- Washing machine Sangiorgio
- Washing machine Freggia
- Washing machine Continental Edison
- Washing machine Blomberg
- Washing machine Electra
- Washing machine Aspes
- Washing machine Waltham
- Washing machine Rex
- Washing machine Pitsos
- Washing machine Eudora
- Washing machine Winia
- Washing machine Sôlt
- Washing machine Castor
- Washing machine Essentiel B
Latest Washing machine User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024