Philips 32BDL4031D Manual
Read below đ the manual in Italian for Philips 32BDL4031D (48 pages) in the Monitor category. This guide has been helpful for 2 people and has been rated 4.5 stars on average by 2 users
Page 1/48
www.philips.com/welcome
32BDL4031D
43BDL4031D
49BDL4031D
55BDL4031D
V1.00
User Manual (English)
ii
Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those speciîed in this documentation may result in exposure to
shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your display:
Operation:
⢠Keep the display out of direct sunlight and away from stoves or any other heat sources.
⢠Remove any object that could fall into ventilation holes or prevent proper cooling of the displayâs electronics.
⢠Do not block the ventilation holes on the cabinet.
⢠When positioning the display, make sure the power plug and outlet are easily accessible.
⢠When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation.
⢠Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
⢠Do not subject the display to severe vibration or high impact conditions during operation.
⢠Do not knock or drop the display during operation or transportation.
⢠The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour. Prolong usage is
prohibited. Please keep a clear safety area under the display while using the eye bolt.
Maintenance:
⢠To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do
not lift the display by placing your hand or îngers on the LCD panel.
⢠Unplug the display if you are not going to use it for an extensive period of time.
⢠Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never
use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
⢠To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively moist environment.
⢠If your display becomes wet, wipe it with dry cloth as soon as possible.
⢠If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord. Then remove the foreign substance
or water, and send the unit to the maintenance center.
⢠Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
⢠In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the display in a location that falls
within the following temperature and humidity ranges.
-Temperature: 0-40°C 32-104°F
-Humidity: 20-80% RH
⢠LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic screen refresh
application if the unit will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause âburn inâ,
also known as âafter-imagingâ or âghost imagingâ, on your screen. This is a well-known phenomenon in LCD panel technology. In most cases, the âburned
inâ or âafter-imagingâ or âghost imagingâ will disappear gradually over a period of time after the power has been switched off.
WARNING: Severe âburn-inâ or âafter-imageâ or âghost imageâ symptoms will not disappear and cannot be repaired. This is also not covered under the
terms of your warranty.
Service:
⢠The casing cover should be opened only by qualiîed service personnel.
⢠If there is any need for repair or integration, please contact your local service center.
⢠Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your
local service center.
iii
Stability Hazard.
The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the îoor/wall in accordance with
the installation instructions.
Read and follow these instructions when connecting and using your display:
⢠Unplug the display if you are not going to use it for an extensive period of time.
⢠Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is
off. However, never use alcohol, solvents or ammonia-based liquids.
⢠Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
⢠The casing cover should be opened only by qualiîed service personnel.
⢠Keep the display out of direct sunlight and away from stoves or any other heat sources.
⢠Remove any object that could fall into the vents or prevent proper cooling of the displayâs electronics.
⢠Do not block the ventilation holes on the cabinet.
⢠Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
⢠When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before re-attaching the power
cable or DC power cord for normal operation..
⢠To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive moisture.
⢠When positioning the display, make sure the power plug and outlet are easily accessible.
⢠IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the
screen for an extended period of time, it may leave an âafter-imageâ or âghost imageâ on the front of the screen. This is a well-known
phenomenon that is caused by the shortcomings inherent in LCD technology. In most cases the afterimage will disappear gradually
over a period of time after the power has been switched off. Be aware that the after-image symptom cannot be repaired and is not
covered under warranty.
CAUTION
DOUBLE POLE/NEUTRAL FUSING
EU Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/EU).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards
published under Directives of Ofîcial Journal of the European Union.
ESD Warnings
When user close to the monitor may cause the equipment discharge and reboot to the display of main menu.
Warning:
This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio interference.
Product Specifications
| Brand: | Philips |
| Category: | Monitor |
| Model: | 32BDL4031D |
Do you need help?
If you need help with Philips 32BDL4031D, ask a question below and other users will answer you
Monitor Philips User Manuals
17 October 2024
17 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Monitor User Manuals
- Monitor Sony
- Monitor Samsung
- Monitor LG
- Monitor Bosch
- Monitor Huawei
- Monitor HP
- Monitor Panasonic
- Monitor Vorago
- Monitor Jensen
- Monitor Gigabyte
- Monitor AOC
- Monitor Hisense
- Monitor TCL
- Monitor Godox
- Monitor Kogan
- Monitor Behringer
- Monitor Planar
- Monitor Asus
- Monitor Extron
- Monitor Lenovo
- Monitor JVC
- Monitor EMOS
- Monitor Optoma
- Monitor Yealink
- Monitor Dell
- Monitor Brandson
- Monitor Mybeo
- Monitor CSL
- Monitor Bearware
- Monitor Viewsonic
- Monitor Nec
- Monitor Ag Neovo
- Monitor Dahua Technology
- Monitor Simrad
- Monitor Posiflex
- Monitor Hikvision
- Monitor Acer
- Monitor Joy-it
- Monitor Iiyama
- Monitor Sharp
- Monitor Titan Army
- Monitor Soundstream
- Monitor MSI
- Monitor Chauvet
- Monitor Cocopar
- Monitor Asrock
- Monitor Advantech
- Monitor Orion
- Monitor BenQ
- Monitor Antelope Audio
- Monitor DTEN
- Monitor Bauhn
- Monitor Crestron
- Monitor IOIO
- Monitor Barco
- Monitor GVision
- Monitor Postium
- Monitor OSEE
- Monitor Ikan
- Monitor Approx
- Monitor Triton
- Monitor Voxicon
- Monitor KRK
- Monitor Vimar
- Monitor HoverCam
- Monitor HyperX
- Monitor ELO
- Monitor Mobile Pixels
- Monitor Ernitec
- Monitor TVLogic
- Monitor Enttec
- Monitor Feelworld
- Monitor Elvid
- Monitor Freedom Scientific
- Monitor UPERFECT
- Monitor Qian
- Monitor IStarUSA
Latest Monitor User Manuals
27 October 2024
27 October 2024
27 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024